C1 Pro - Motion detection issue

GDay All,

I have just purchased a C1 Pro and I have setup motion detection by adjusting the area that is monitored in the Reolink Windows app v7.2.2.12.

When I first set it up it worked fine, but then somehow, my detection map was lost and it reverted to full screen. I only discovered that because of all of the detections I had from my tree blowing in the wind.

I set up the detection map again, but now it doesnt trigger at all.

I have double checked to make sure motion detection is enabled and the sensitivity is set to 12 for all time zones.

I have rebooted the camera several times, but no change in the motion detection.

I also use this camera with Synology Surveillance Station on my Synology NAS and it works well in there also, but it no longer alerts me to any motion detection either.

I have attached an image of my detection map to give you some idea of how it is setup.

Does anyone have any clue as to what may be wrong?

Any help would be appreciated.

untitled.png

Nevermind, I discovered that I needed to restart Synology Surveillance Station and then the Reolink app, then everything started working again.