Flash Sale Today!
TrackMix New Firmware Update: Auto-Tracking Range & Tracking Schedule
New NVR Firmware is on Download Center Now!
RLC-823A & RLC-523WA Tracking Beta 4.0 Firmware: Added Auto-tracking Horizontal Range & Schedule
I have the 16 port NVR from Reolink and need information on what to do if I use all 16 ports for the following cameras:4x RLC-4233x RLC-4209x RLC-4102x internal SATA hard drive.I currently have 3x RLC-420, 9x RLC-410 and 2x hard drives connected and my power draw at the wall is at 100watts. The supplied AC adapter is rated for 48V x 2.5amps = 120watts. Taking into account 90% efficiency of the AC adapter that means I am currently using 90 watts out of the available 120 watts. Adding just 2x RLC-423 would put me over the edge.What are my options if I want to add more power hungry cameras?
Well, you can use power adapter (DC12V) to power the added rlc-423 in case the total power all your cameras comsume exceeds 120watts.
Hi AlirezaRefer to：Base on your calculation, your available watts has only 30 watts left, but one RLC-423 use 22W. so as you said, there is not enough watts for the RLC-423s.howdymoody was right.You can use PoE switch to connects RLC-423 and NVR and make sure to use a power adapter on PoE switch that provides watts required for RLC-423s.ipc-power-supply-1.jpg
phraew - I prefer to connect all my devices directly to the NVR without using an additional injector or separate PoE switch. One possible solution is to buy a AC to 48v DC inverter that goes up to 200watts and install the same power tip the NVR uses. This should work right?Also, is that table correct?802.3af = 15.40 watts max802.3at = 25.50 watts maxI think the table has it backwards if I am not mistaken.
Hi AlirezaThank you for the reminder. I've correct it.We recommend to use the adapter in the box we provided. By this way, you may connects only one RLC-423 to the NVR directly without separate adapter. For more RLC-423s, we suggest you to use additional PoE injector/switch (802.3AT) or adapter.The method you mentioned has the possibility burn up the NVR board.
Hi there! Join the Commnunity to get all the latest news, tips and more!