This would be so useful, I'm dealing with so many falls alarms and it's very difficult to identify the origin of the alarm.

• Being able to activate an overlay showing what movement / pixels in the field that triggered the alarm would help a lot.
• 

• Another option could be to have a more visual history log showing thumbnails of what have triggered the alarm in the field.
• 

Tweaking down my settings to reduce the falls alarms isn't an option. When doing this then I start missing several alarms.

I bought the Reolink RLC-823A with the intention to replace my existing Netatmo Smart Outdoor Camera from Legrand and later add 4 additional Reolink's.. But for now I keep both cameras on until the Reolink firmware gets improved and provide accurate alarms.

Thanks

@Marcus for the 823 I was able to download the latest firmware on the Reolink Download Center website(https://reolink.com/download-center/).
Seems like the beta version has now been approved and published for official deployment.

This would be so useful, I'm dealing with so many falls alarms and it's very difficult to identify the origin of the alarm.

• Being able to activate an overlay showing what movement / pixels in the field that triggered the alarm would help a lot.
• 

• Another option could be to have a more visual history log showing thumbnails of what have triggered the alarm in the field.
• 

Tweaking down my settings to reduce the falls alarms isn't an option. When doing this then I start missing several alarms.

I bought the Reolink RLC-823A with the intention to replace my existing Netatmo Smart Outdoor Camera from Legrand and later add 4 additional Reolink's.. But for now I keep both cameras on until the Reolink firmware gets improved and provide accurate alarms.

Thanks

@Marcus for the 823 I was able to download the latest firmware on the Reolink Download Center website(https://reolink.com/download-center/).
Seems like the beta version has now been approved and published for official deployment.

Hello,

I've done some testing and in my case no improvements on vertical pan & tilt auto-tracking. I even think the tracking worked better with the official production release.

I'll keep this firmware on the camera for now, not sure if it also contains improvements on the pet detection which isn't working that well for me. During day time it recognises pets in 60% of the cases, during night time almost never. I have another static camera covering almost the same angle, that I plan to remove once the RLA-823 will be as accurate. This other camera doesn't have any issues with animals during day/night time.
During night time moving animals are not event recognised and recorded as movements !

If needed I'm willing to privately share some videos. I would also find it helpful to be able to activate an option to be able to identify to origin of a movement. This would really help fine-tuning the settings and accuracy. Now often a movement is detected but I really have no clue where on the picture...

Thanks