@joseph-chircop_497308027822318
I had an RTSP stream working in VLC fine from the RTSP stream URL I gained and this was using port 554 but again, no luck on the NVR as when I change the port and click apply it always reverts back to port 80. I also tried the IP Cam setting rather than ONVIF without any luck.
Thanks

@joseph-chircop_497308027822318
Looks good but it seems that in the new UI Reolink have removed all of those options. I cannot select camera 2 as it has "failed configuration" on the channel page so I can't check if changing any settings on the camera page would work!
Very frustrating.

@sasuke
Hi, Thanks! By change sub stream encoding from H265 to H264 do you mean change this on the DVR and if so would you mind directing me to this setting?
Thanks,
Ben

@joseph-chircop_497308027822318
Hi,
I have checked those ports with no luck. I have already used ONVIF Device Manager which gave up ports 80 and 554, again checked with no luck.

@joseph-chircop_497308027822318
Hi,
Thanks for your reply. Just tried that with no luck, same error message.
Ben

Hi all,
I am trying to add a Yale (Assa Abloy) Front Door Wi-Fi Camera (SV-DAFX-B) to my RNL8-410 using the OVINF protocol that the Yale camera is compliant with. I have managed to add the Yale camera to Blue Iris via ONVIF no issue. On the NVR I have enabled OVINF in the advanced network settings and the NVR was then able to find the Yale camera however when I corrected the password the camera appeared as "Connection Failed". Any help would be appreciated as this only appears to be an issue with the Reolink NVR.
Thanks!