Posts made by audrdem_38325325504

Try Reolink app.

All Reolink ports must by open on the router. For my this app works without problems.

Works half assed. I need to be able to get to it from outside my lan using my internet IP address..

Then You need to use/write WAN IP

On Ch.# need to write media port, by defoult 9000

Bob, you a right, but at the same time wrong. I think without the possibility to detect motion on cruising or at least while cruising on present points, I think it the loss of the purpose of acquiring a PTZ camera.

Hi Bob,
http://prntscr.com/g5tb4m - I don't see how I can set more than one cruise paths for the camera on the Reolink Client. Could you in pictures show a way to do it?

About Reolink App, at least it will very usefully to have the possibility to start/stop Cruise path.

"Another I’d like to mention is that- if a user pan/tilt/zoom the camera, the monitored areas will significantly keep changing. Then it’s too hard for the camera to recognize a actual motion during the period." So I wrote about it in my second suggestion " If it is too difficult to do, then at least to have-
2. the possibility to disable motion while the camera is moving (cruising speed), but detecting motion while the camera stays (Cruise Time) on cruise present point."
Thank for your effort.

1. It would be good that PTZ camera can motion detect in monitored area while using the pan/tilt/zoom (Cruise Path) of the camera, but do not give an alert if you only use the camera’s pan/tilt/zoom (cruising speed) and there is no motion in the monitored area. If it is too difficult to do, then at least to have-
2. the possibility to disable motion while the camera is moving (cruising speed), but detecting motion while the camera stays (Cruise Time) on cruise present point.
3. Possibility to on/off the alarm.
4 Possibility to assign more than one Cruise Path.
5. Possibility motion detect area setup for each cruise present point separately
6. Possibility to have same settings makings on Reolink Client and Android app - Cruising, Motion Detect setup...

I HOPE that you cosmo454 are wrong about Bob and all Reolink support (summer/holiday time).
I would like that PTZ camera can motion detect in monitored area while using the pan/tilt/zoom (Cruise Path) of the camera, but do not give an alert if you only use the camera’s pan/tilt/zoom (cruising speed) and there is no motion in the monitored area. If it is too difficult to do, then at least to have the possibility to disable motion while camera is moving (cruising speed), but detecting motion while the camera stays on cruise present point.
And yes, Is there any reason why we can assign only one Cruise Path?

Thanks both

Sorry FongJeng Kum,
But from attached picture, I can't understand what for ferrite do you use and how do you use it.
Can it buy on ebay, or do it yourself? Maybe you can explain like for dummy
Thanks in advance

Audrius

Turn off motion detection will be very useful on the android app too.

Hi FongJeng Kum,

Maybe you can explain in more detail how you do it. "place a ferrite to the ethernet cable on the PoE injector"???

I do not see such a program (7/20/17). Maybe you can write a link?

And how are with "It will very usefull to have motion detect area and sensitivity for each Cruise Present point separately." Or please just motion detect area setup for each cruise present point separately.

Maybe I need to change the need for improvement.
It requires that the camera alert when the motion detected in monitored area using the pan/tilt/zoom camera, but do not give an alert if you only use the camera's pan/tilt/zoom and there is no motion in the monitored area.

Hi technology, maybe you can share client software version v7.1.2.44. I would like to compare video quality with new client version on my rlc423.
Thanks in advance.

Need auto dissabling motion alarm on cruising moving time. Now are large flow of alerts by cruising moving, so important alerts on stay on cruise time present can be missed. It will very usefull to have motion detect area and sensitivity  for each Cruise Present point separately.

7.2.2.7 use without problems on Win10 64bit. 7.2.2.10 use without problems too.