Posts made by Smoke_428036966641883

That doesnt work, the IP address is of the NVR, so there has to be a way to specify which channel to view

Is it possible to add PoE cameras connected to the NVR be visible with Google Home?

I saw some post where it could be done if you connect directly to the camera, but in my case, my cameras are connected to the NVR and they are on a separate network, I can only reach the NVR ip

I tried to enable the Smart Home features on the Reolink app but it says that I dont have any compatible devices?

My NVR is RLN8-410 with a set of 8 PoE RLC-810a and RLC-820a cameras

I have a RLN8-410 with a set of 8 PoE RLC-810a and RLC-820a cameras connected and im trying to view them using standard RTSP protocol.
Ideal I would like to use tinyCam Monitor and VLC player to view them, However i cannot get them to work

I was able to open the sub stream of the cameras with VLC, but never the main

This works fine:
rtsp://user@192.168.0.122:554/h264Preview_01_sub

This ones does not

rtsp://user@192.168.0.122:554/h264Preview_01_main
rtsp://user@192.168.0.122:554/h265Preview_01_main

Also in tinyCam I didnt found any way to customize the URL so idk how to make it point to the substream instead.