Posts made by user_709123426357433_709123426357433

@joseph_1979 Although it was ultimately unsuccessful, I would like to thank you for your effort.

@joseph_1979 I have lost hope that there is a solution. The RLC-842A was supposed to replace my RLC-422. The old camera also had an FTP problem. In addition, there is no new firmware for this camera (Flash Player is still used). I tested the old camera again today. The test transmission is still ok., but images are still not transmitted. That was always via email. There seems to be a fundamental problem with the Reolink cameras (for me).

@joseph_1979 I looked through everything again on the Fritzbox, but found nothing. My guess is that the problem is with the specification in the "Remote Directory" field and therefore no target is found.

@joseph_1979 it worked with the PC as an FTP server. The images are saved on the PC. If I define the FTP server again on the Fritzbox, the error comes again.

@joseph_1979 I hope it was right. I set the PC as an FTP server for the camera.

@joseph_Thank you for your trouble.
I released ports 20, 21 and 990 on the Fritzbox. I tested it repeatedly with FTPS and port 21. The Fritzbox accepts TLSv1.2 and since 2016 also ECDHE. On the Fritzbox page, it was not previously possible to see that the camera had attempted to log in. I've also tried using the wrong username on the camera to see if it provokes an appropriate error. The same error message always comes up. Also in detailed LOGs on the Fritzbox I find no reference. As they suggested I tried again using port 21 and FTPS. The error still comes.

@user_709123426357433_709123426357433 I tried again with PASV, but no success.

@joseph_1979 I've already tested FTPS, PASV and /cameras/ with no success.

@joseph_1979 I installed coreftp and filezilla. Unfortunately, I am not familiar with that. I have attached a picture. Before I do anything with Wireshark, I'll probably have to change some settings.

@user_709123426357433_709123426357433 there is no access to the FTP server. If I enter a wrong username, then the same error comes up.

@joseph_1979 I thought I found the bug (port release for port 21 on the FTP server was missing).
Unfortunately the error is still there.
I upload 2 pictures (camera and Fritzbox as FTP server)
Fritzbox is also the Routr. There is a USB stick on which the camera images are saved. The USB stick is released.

@joseph_1979 The firmware was up to date.
I installed Wireshark, but I can't find anything about the IP addresses of the FTP server and the camera.
I had previously installed an older camera from Reolink and FTP didn't work either. There are no problems with the other cameras (Hikvision).
Does nobody have FTP for Reolink active yet and can give me the configuration as an example?

Hello, I've tested different variants, but I always get "454: Connection failed. Please check your network connection."
Can someone give me an example?