Hey everyone,
I recently faced this exact issue with my Reolink camera — no push notifications at all, even though motion was being detected and recorded. After digging through forums and experimenting a bit, I finally managed to get it working again. If you're dealing with Reolink notifications not working, here's a checklist that worked for me:

1. Check Notification Settings in App
2. First, open the Reolink app and go to your camera settings. Under “Push Notifications,” make sure it’s actually turned on. It sounds simple, but sometimes app updates can reset these settings.
3. Allow Notifications on Your Phone
4. On Android/iOS, go to system settings → Apps → Reolink → Notifications. Make sure permissions are fully enabled, including banners, lock screen, and sounds.
5. Firmware and App Updates
6. Make sure both your Reolink device firmware and the Reolink app are up to date. You can check the device firmware by going to Device Settings → Info → Firmware Version.
7. Motion Detection Settings
8. Go to Detection Alarm settings in the app and ensure motion detection is enabled. Fine-tune the sensitivity to avoid missing movements.
9. Stable Internet Connection
10. Sometimes notifications fail due to poor internet — especially if the camera’s upload speed is low. Try switching to a different WiFi network or improving your router placement.
11. Reboot Your Device
12. Sounds cliché, but rebooting your camera and even reinstalling the app can resolve hidden glitches.

Hope this helps someone out there! Also, for anyone looking for a fun break while troubleshooting tech issues, check out Wordle Answer Helper — saved me during a long camera setup!
Let me know if you need more help!