b800 firmware

57

Hi, I was looking at firmware updates to see if there were any for my b800 cameras and noticed that firmware listed for any cameras all start with ipc_xxx. my hardware number says h3mb16. is this correct or is it not displaying correctly? I updated my NRV firmware and slightly paranoid I did it wrong

snip.png

ZHONG Yixin

Sorry for the inconvenience. Your NVR’s firmware is already the latest one. If you want to upgrade the camera's firmware, you may need to do it via the monitor. Do you connect your NVR to a monitor? If yes, please refer to this article: https://support.reolink.com/hc/en-us/articles/360005131094-Upgrade-Firmware-via-PoE-NVR
B800's latest firmware: https://support.reolink.com/hc/en-us/articles/900000033303-12-10-2019-Firmware-for-B800-D800-IPC-5158MP8M-

57

Hi, thanks for the reply.

No, I only use the client program. I was hesitant to use that firmware because the hardware version said it was only for IPC_5158MP8M, where the client it said mine was h3mb16.

I will see if I have a long enough cable to connect to a monitor lying around.

david brad2

Alien bee with an advanced interface, LED demonstrating light and can be remotely controlled with the Cyber Commander meaning you don't need to stroll to the light to change power settings. Consider it an overhauled Alienbee, is the update worth the cost? Well that depends on the off chance that you will be getting a Cyber assignment help london Commander arrangement also, in the event that in this way, at that point indeed, feel free to pay for the persuade of not getting to the rear of your light.