I just added a RLC-1224A camera and it looks worse than my 5MP RLC-520A.

[user_794485519941839_794485519941839]

I have a RLN8-410 NVR with 5 RLC-520A cams. They run well, are very crisp looking, get good framerate, and good night vision.

This whole system is displayed on a 4k monitor by my desk connected to the NVR via HDMI. The live view is crisp and has good framerate.

I just added one more camera, a RLC-1224A. I've set it up, set it to max res, set it to max framerate.

I've got three big issues with this particular camera.

• The video and image clarity is extremely lacking, looking lower resolution than my 5mp cameras.
• The video framerate is choppy. I'm a gamer and very sensitive to framerate. My 5mp cameras are displaying video at 25-30 frames a second. The 12mp RLC-1224A is outputting on my monitor at 3-4 fps. Vehicles driving by are stuttering by, it's bad.
• The camera has a light and both the NVR and the software interface will not let me disable the "spotlight". It also won't let me lock the night mode to black and white. What's been happening is that every type of motion triggers the spotlight. It comes on and off every 30 seconds, which then causes the software to adjust the video feed between black/white to color, causes it to temporarily overexpose, it basically just tweaks out constantly.

I really need to get all 3 of these issues fixed, but especially the light and the framerate.

Worth mentioning, they're all wired direct to the NVR with Reolink Cat5. The NVR is updated to latest firmware edition.

Thanks in advance for any assistance.