Upgrading firmware on cameras

[Guest]

Just installed a new 16 camera system and trying to upgrade the firmware on all of the cameras.

Your instructions that come with the zip file do not agree with my Reolink Client software.

You say to go to maint and choose "Frimware Upgrade" but my version of Reolink Client does not have this option. (Version Version 2.2.8 (2.2.8.30))

Also in the "Device Setting" System menu the "Build" information for a particular camera is XXXXXX but nowere in your firmware upgrade do you say what build the file is.

I am guessing that the last characters of the file name is the "build" number?

[Guest]

Hi，Affiliated.
For the camera with NVR upgrade, you can download the file from our website.
And you can check the firmware version of the cameras which have connected to your NVR, the path is Menu->IP channel->choose one camera(the status should be Previewing) then click the Detail(refer to below).

For upgrade IPC on NVR steps:
1.Prepare a USB flash drive.
2.Copy the firmware of IPC to the USB directly.
3.Insert the USB to the USB port.
4.Enter the Menu->System->Maintenance->Upgrade IPC from USB, then select the upgrade file for your IPC and click upgrade.(refer to below)