Share Your Local Security Installation to Win Cameras
Get Your 25% OFF for Local Storage NVR Kit Now
Talk About the Local Storage: Pros/Cons and Local Storage Options
Bringing Up New Products Check Out What's Coming Next
Where to install the 360° Reolink Fisheye? Here are recommended Positions
Hi,can I use Reolink NVR to record Reolink POE Cameras that not connected directly to the NVR, the cameras are connected to other POE Switch and all devices are on the same networkthanksBarak
the cameras are connected to other POE Switch and all devices are on the same network
Hello Barak,Did you get this working?If so, what equipment did you use and how did you connect it up?Was this to add one or more cameras in 'addition' to the amount of available ports on your NVR?Thanks in advance...
Yes, you can. You can connect the NVR and your cameras to the same router. In LAN, you can access the cameras separately via Reolink software, you also can access them under Reolink NVR.
Hi, here is some more information:After the cameras are powered on via PoE switch and are connected to the same router with the PoE NVR, generally, those cameras can be added by the NVR automatically. However, if you set a password for the camera, it will show "Invalid PWD" in the NVR IP channel page, and you will need to input the correct camera password to add the camera to NVR.And you will need to plug the NVR to a monitor via HDMI/VGA cable to a monitor then do the operation via the monitor interface.
Hi there! Join the Commnunity to get all the latest news, tips and more!