15 seconds back

tom

Hi. A lot of nice features on your android app and NVR. I do however miss a couple of things that i would like to suggest here.

First of all my setup is NVR 8 with 4 x RLC811A cameras ( so far ).

I miss the opportunity to easily be able to wind back 15 seconds or so on live stream through a simple "15 sec back" button like we see on some streaming apps. Push it again to get even further back.

Lets say i hear a sound/noice outside my house but have only person and vehicle alarm active so no alarms are triggered. I then jump into live camera but see nothing strange at this point. In order to actually check what the noice was some seconds ago i first have to enter recorded files, then fast forward nearly to the end on the latest file to see if i can see what was making noise. Not easy... or fast...

When entering stored files one also find the pointer to start at the oldest files by default, so each time i need to scroll to the latest file, even to check a person or vehicle alarm i have to do this. I would expect the pointer to be set on the latest file by default, for fast access to fresh recordings. Also here a 15 sec back or 15 sec forward button would be helpful, its not a very precise manouver to scroll the time back/forward from a smartphone.

I also miss the opportunity to define a grid from where i would like alarm on any motion. Per now i only have person, pet and vehicle alarms active to limit the amount of false alarms. But on some areas i would like an alarm on any motion, for example to detect if the light in my garage are turned on or off by drawing a detection zone on and around the window, draw detection zone over a door, or whatever.

Other than this i'm super exited on your nice camera stuff, so thank you reolink !