Add Reolink cameras in ASUSTOR Surveillance Center with UID

[Kixemi_638861445845076]

Hello!
I have Reolink cameras at my cottage and "Surveillance Center" running my Asustor NAS at my home!
The cameras and the NAS resides on different LANs (Local Area networks) so there is no "direct" connection, the communication has to go over the internet.
I know how to connect the cameras to the NAS using port forwarding, but that is quite a big "setup".
I could also set up a VPN in order to get them on the same LAN, but,
I have UID activated on the cameras!
My question is: Is it possible to somehow use the UID for the Asustor Surveillance Center connection?
Reolink is not listed under supported "Brand":s. Can I use "User-Defined"

Best Regards Kim


Live View - ASUSTOR NAS

[Nick McEwen_155798114500752]

@kixemi_638861445845076 I have done this successfully by selecting camera type ONVIF and model GENERIC. Then enter the IP address of the camera and port 8000

[Adelin_800197592113363]

@nick-mcewen_155798114500752 what type of reolink camera did you manage to add using onvif? I have 4K cameras and adding them via ONVIF gives me no image, and the status is Disconnected. Adding them via rtsp works in a way (I have live feed) but the recordings are weird: only half of the capture areas (left side) have the actual images, the right side is blank