Sorry I pushed the wrong key.

I recently set up a privacy mask on my E1 outdoor. I noticed that when I swing the camera around, the mask moves with the camera. When I swing the camera to look at my dock and
boats the mask blocks my view.
I would think that the mask should stay where I placed it and not move.
when I swing the camera, what I blocked becomes visible.
Am I missing something ?

Sorry I pushed the wrong key.

I recently set up a privacy mask on my E1 outdoor. I noticed that when I swing the camera around, the mask moves with the camera. When I swing the camera to look at my dock and
boats the mask blocks my view.
I would think that the mask should stay where I placed it and not move.
when I swing the camera, what I blocked becomes visible.
Am I missing something ?

Privacy masks on PTZ cameras.

@seaisland215_530551422046397

Ok the splitters arrived yesterday and they worked perfectly. Just be advised that there are 2 versions.
A 5v and a 12v. Various cameras require different voltages.
Thanks
Scott

Thanks jedi2020 and kpb for ypur help. I am going to give the splitter
a try. Will reply and let you know if it works.
Thanks

Thanks for your help. I thought I read somewhere it could be done. I do use the lan jack to carry the data to the NVR via the router. And supply power via the power cable and plug in adapter. I could hide the LAN cable but not the power cable.

Is it possible, via a poe switch or poe injector, to power my E1 Outdoor camera and transfer data via the LAN cable. If possible a detailed description of how it is done would be appreciated
Thanks