@reolink-lorenz I see that your computer "client" program works the same way. Say you make changes to Persons in the Recording menu and save them. Then you make changes to Vehicles in the Recording menu and save them. Then you decide you need to make additional changes to Persons scheduling in the Recording menu, so you go back in and activate Persons (only) in the Recording menu. At that point, in neither the smartphone app or in the computer "client" program, do you see the current settings for the Persons configuration so that you can simply add your new changes. Instead you have to key back in your original 24/7 configuration and then add your additional changes before you save again. And then, again, you will not be able to see exactly what that schedule is in the future. You will simply have to remember or have written it down. What a pain if you have a very complex schedule.

Again, can't connect to my new T-Mobile Arkadyan wifi 6 gateway and was thinking that could be the problem. I have gone through the process so many times I think I am a freakin expert. I wonder what else could be going on. T-Mobile does not let you get at router settings at all, except to simply separate the combined 2.4-5 GHz setting. Old Bravia connects. Computer connects. Samsung phone connects. Reolink does not. Frustrating. And, yeah, trying to get some answers from T-Mobile. Thanks, again.

@crimp-on_62210811129 Thank you.

Can't connect to my new T-Mobile Arkadyan gateway and was thinking that could be the problem. Thanks in advance.

@reolink-lorenz Ah-ha, I see. So if you set up a recording schedule for say People only then, by default, there will be no recording of Vehicles and Others? By your picture, it appears I am giving you a headache.

@reolink-lorenz I see that your computer "client" program works the same way. Say you make changes to Persons in the Recording menu and save them. Then you make changes to Vehicles in the Recording menu and save them. Then you decide you need to make additional changes to Persons scheduling in the Recording menu, so you go back in and activate Persons (only) in the Recording menu. At that point, in neither the smartphone app or in the computer "client" program, do you see the current settings for the Persons configuration so that you can simply add your new changes. Instead you have to key back in your original 24/7 configuration and then add your additional changes before you save again. And then, again, you will not be able to see exactly what that schedule is in the future. You will simply have to remember or have written it down. What a pain if you have a very complex schedule.

When I go into Camera Recording or Push Notifications or Sirens and click on Schedule and then make changes to Person only and then save them and then make changes to Others only and save them, I will then exit Schedule. When I then go back in to Schedule, what it shows for each Persons, Vehicles and Others and for all of them, is the schedule I established/enabled for the last scheduling change I made, in this instance they all show the changes I made to Others. Counterintuitive at best. Is it simply that those changes have been enabled correctly and that they do not show up in the app under Schedule. Is it that they don't "stick," so to speak?