Thermal as I live on a large property but you know what I would like to see? A cell 4/5g fall back for when someone tries to cut your power and internet. All of this is useless if someone cuts your power and internet and your system nvr/cameras can't alert out.

@joseph_1979
My firmware was up to date. I set it to 5s and it seems to be better now.

I think the issue is the road is about 150 feet from the house so cars seem small which might confuse the system. I also noticed when walking in the yard pulling a wagon it alerts pet. But after the adjustment it seems better. It was just annoying getting 2 alerts all of the time.

Every time a car goes by I get 1 alert for vehicle and 1 alert for pet... How do I reset that?

I don't have one of these yet but is there a way to mount the E1 under an eve or better said, from a ceiling? It looks like you can only mount it to a wall.

So does this also require a sim card? I enabled everything as outlined here (clear mode and Motion Mark Beta enabled) but nothing changed as in no motion marks. RLC-842A's and Trackmix POE.

On the IOS app you have an NVR and all the cameras listed there but further below you have the cameras listed again and that is where you enable the Motion Mark. But if I try to view from there it says no sim card so I go back up to the top under the NVR and select the same camera and then select PlayBack.
What I see is only the 60 minute packs but when one of the packs detects motion it will stop the pack and start the next pack. So most of the time I can search for the motion alert at the end of the cut off pack.

Maybe I'm doing some wrong but I did follow all of the step and understand--- BETA...

@joseph_1979
well never mind. I deleted it from the NVR and not the APP. Once I deleted in the app It is working now.

However I'll add that from the beginning when I selected the gear from any camera it showed mostly the NVR stuff. Now that I deleted the Trackmix POE from the app all of the other cameras disconnected (which was weird) But when I added the Trackmix back and I selected the gear it didn't show any of the NVR it showed an icon of the camera and things got better. After I re-entered the password for the other cameras I had to rename them again and the NVR no longer showed when going into the camera gear. Those also show the camera icons and now Scene mode shows all.

Guess there was something going on in the app that somehow corrected itself.

@joseph_1979
no that did not work. I also updated the firmware on the NVR no difference.

@radioastronomy_410111540293820
How my RLN36 works is when both Alarm and Trigger are set and when motion is triggered it will stop my 60 minute pack (port motion included). So I have to go around 3-5 minutes from the end of the stopped packed clip and find the motion alert. I wish it would just keep my 60 minute packs and make a new motion clip but it doesn't work that way. At least I haven't found an option for that. Another thing is I wish the Playback would start at the last pack and not at the first one so you wouldn't have to scroll every time to find the pack you want. Was just a learning curve to understand what was going on.

Does the Trackmix 4k PTZ do Scene Mode? Mine doesn't show up.

Is there a manual for just the RLN36?
Also is there a list of cameras that can be recorded on the RLN36? Asking because I see some of the battery cameras can't be recorded to the NVR. It would be nice to have a complete listing so I don't end up with a camera that can't be recorded to the NVR.

Thanks