@joseph_1979 Hello Joseph. Thank you for your prompt response.

As I can see, the RLN36 has 8x alarm in & 4x alarm out. So, one of the alarm out, it could be connected to my security system. Correct?

Now, If I purchase the RLN36, is it possible to be coneected to the existing RLN16? Or I should remove the RLN16 and connect all the cameras to RLN36? Do I need a POE switch as well?

@user_731393886605564_731393886605564 Which outputs do you mean? The only available ports on the Reolink's CCTV is a) VGA b) HDMI c) USB and d) Audio Out. Non of them can be connected to the input of a security system.

@joseph_1979 Hello mate, thanks for your response.

Email alerts and push notifications are already being enabled.

My concern is how to enable the input of a security system through the above notifications?

For example, some CCTVs manufacturers have an alarm box which enables the input of a security system once the detection alarm of the camera being enabled.

How is possible to enable an input of a security system through a notification?

Hello guys,

I have installed the RLK161200D8-A CCTV system together with 8 security cameras.

The detection alarm works perfectly, however, I would like to connect the cameras to a 24/7 security company.

The problem is how to send the triggered signal from the camera to a security system and then to 24/7 security company?

Is there any way to achieve this without installing separate motion detectors on the security system?

BR,