@reolink-fiona

Thank you

Right after making this post i noticed that the 10, 5, 2 second options became available in the mobile app but the save buttons in the FTP area was grayed.

As of last night 6-11-2022 i was able to change the FTP push time to 2 seconds and everything seems to be functioning as expected.


Thanks ReoLink for making this possible.

Right after making this post i noticed that the 10, 5, 2 second options became available in the mobile app but the save buttons in the FTP area was grayed.

As of last night 6-11-2022 i was able to change the FTP push time to 2 seconds and everything seems to be functioning as expected.


Thanks ReoLink for making this possible.

@reolink-fiona

Thank you

@reolink-fiona

I just purchased this NVR and a couple of the cameras. Can i submit an enhancement request to lower this time on the NVR products too?

@reolink-fiona

Hi Fiona,
I have a mix match list of cameras, none of them with the reolink AI detection. From there i have some of them attached to my RLN8-410.

• RLC-520 x2
• RLC-420 x2
• RLC-422W x1
• C2-Pro x4

I have powershell scripts running that perform various functions when objects are detected outside the house, i don't think i would be able to tie the reolink AI into my environment.

Would the AI cause the NVR to push the images on a higher frequency?

Would it be possible to send FTP images via an NVR every second while motion is in progress. I keep having issues where shadows or car lights will trigger the image transfer. ( Example Below )

I've tried adjusting the sensitivity but it depends on how the trigger happened along with some luck to accurately get the person each time. The reason this is important to me is because i process each image through deepstack. The image below would only indicate only a car is in the picture and actually miss the person that walked by.