Posts made by astrabuster_424413394026691

Finally i ve got an answer !
( bought the reolink 810 set an tried a lot of stream-pulls)

Only if a h264 cam is connected to the nvr it s possible to pull the h264 stream of 1cam , main or substream with :

Main Stream: rtsp://admin:password@ip_address:554//h264Preview_01_main

Sub Stream: rtsp://admin:password@ip_address:554//h264Preview_01_sub


If a h265 cam ( 810a ) is connceted, there is no stream ( even if it s changed to "h265Preview...")


The nvr got his own dhcp network/different ip system.

If u want to pull main or substream directly from a h265 cam you have to use a poe-switch or poe-injector and connect it to your regular network
( your router or switch).

It s still possible to assign them in the nvr !

To get the h265 stream just pull it with :

Main Stream: rtsp://admin:password@camIPAdress:554//h265Preview_01_main

Sub Stream: rtsp://admin:password@camIPAdress:554//h264Preview_01_sub

I connected all 4 cams with a 4port-poe-switch to the router and got the stream of each cam.

Hi Folks,

hope you are doing well.

I ve got an Foscam NVR System (2MP) and want to switch to the Reolink RLK8-810B4-A System.
Is it possible to pull the h265 stream of each 810a cam behind the NVR ?

Background :
i am using an iPad Air (installed at the hallway) with the IP-Cam-Viewer-APP ,pulling the stream of 2 foscams to show my entrance 24/7.

I am not sure if this works with the Reolink-NVR System ?

In Addition, is it possible to watch multiple cameras on Playback ?