@joseph_1979
Thank you for your long reply
I'm sorry, I misunderstood what I said.
I mean the swap in SD card slot 1 in the HHP.
There are a few files on this card that can be copied to a new SD card.
Except for one file called db...? - it's protected and can't be copied:



I tried it again today - it worked!!
Strange... but it takes a very long time...



It wasn't the adapter's write protection!

When I press the button on the HHP, nothing happens, neither a short press nor a long press.

I have no idea what it does.

@joseph_1979

Hello Joseph,
Thanks for your detailed answer.
I've done everything as directed, but the recording upload isn't working.
I can upload the test files (TXT) from the HHP and both cameras to the FTP.
The FTP runs on an AVM Fritzbox and has worked with the RLC-510A for many years without any problems.
OK, I'll reset the Argus 3 next week, maybe that will help.
I hope my new Argus 3ultra arrives then, too.
(What firmware do I need for HHP operation?)

I have three more questions:

1. SD card swap:
I want to swap a 128GB card for a 512GB card in slot 1.
I wanted to copy all the old data from the 128GB card to the 512GB card.
Unfortunately, the db* file is write-protected, and cloning with Acronis doesn't work either.
Or is the db* recreated with the old data?
Is there another option? - or is all data always lost?

2. Button on the front of the HHP:
What does the button do?

3. Smart linking:
Which devices can be linked here?

I wanted the following:
If camera 1 is recording, then camera 2 will also record.
Am I making a mistake?

Thanks for your answers

@joseph_1979
Hello,
I already got the new firmware from support.
I've enabled FTP on the camera and the HHB, but I still can't upload.
The recordings from both cameras are available on the HHB.

How do I do it correctly?
First, fully set up the camera and then add it to the HHB?

Or reset the camera to factory settings and then add it to the HHB and configure it completely there?
I've now ordered a Reolink 3 Ultra.
I wanted to do everything right.

I think I'll have to start from scratch again.
I am also in contact with support.

Hello,
I have an Argus3pro and an RLC-510A registered on the HUB1.
The recordings should also be uploaded to an FTP server.
Everything is configured, the test files (txt) arrive on the FTP server from both cameras.
The email notifications are also sent from both cameras.
Only the recordings from the RLC-510A are uploaded, not the Argus3pro.
I thought the recordings were being uploaded from the HUB1, not the camera itself?

Can anyone help?
Thank you


All devices have the latest firmware!

Hello, that's why I'm going to switch to instar

iNSTAR

Hello,
i am currently using two reolink ip cameras.
i urgently need the webhook when moving.
Instar can also ...

Webook to Smarthome