@canman8754_715057639481475
app 4.40 new feature motion tagging (beta)

What's new:
1. Add Motion Mark on liveview/playback
When a person/car/pet is detected, there will be a motion mark on it.
Setting: Select Clear mode for liveview/playback- Settings -Detection Alarm- Turn on Motion Mark

*Require cameras with smart detection. And the motion mark is only available when the Clear mode is selected.

@issom what's happened is the camera's tracked something and blinded its self making it inoperative, the spotlights/ir reflected off the surface , goto alarm detection settings and set the horizontal tracking range so the camera doesnt do a full 355°

rlc-830a & rlc-81 pa ?

are reolink thinking about adding 'patrol mode' for these two camera's , also adding motion tagging to fluent (beta)?

app 4.40 issue/ bug
updated today , noticed that live view image get abit zoomed in when first starts up for a matter of seconds then goes to normal view

@joseph_1979 i asked support about firmware ,
Dear Jason
 
I learned from our engineer that 23082406 is the official firmware and has been pushed to the online users already.
As for 23082809, it may be a beta firmware or test firmware produced by one of our engineers to solve a certain problem or collect some info to debug the issue, so the final official firmware is still 23082406.
so dont know if its going to be released after testing

firmware update on phone ?
had a firmware issue for the rlc-830a , contacted support (cant fault them great help)
got sent newer test firmware , had to download it , send it to sd card , remove micro sd card put it into notebook , start client , update firmware , .
any chance of looking into updating firmware straight from phone ? through the app manually . also new cameras have test push notification,
any chance doing it for all cameras , pretty hit and miss getting Alerts from likes off eco argus 2 2e many thanks jason

bring camera back inside, where the wifi signal is stronger ,reset and set it up again, add the network you want use , you need a network to view camera and footage , you may need a wifi booster /extender or a access point to get the signal strength so camera connects