Posts made by m.mittelsdorf_50664602606

Hi,

can i use the H3MB02 Firmware for RLN16-410 to upgrade my RLN8-410 nvr?

Hi,

my problem is that i can never find a newer firmware in combination of model an hardware revison for my cameras and my nvr.
e.g.

NVR: Model RLN8-410
HW-Rev: H3MB02

Where can i find a newer Firmware?
The combination of Model and Hardware-version never matchs!
https://support.reolink.com/hc/en-us/articles/900002938243-09-28-2020-Firmware-for-Reolink-RLN8-410-E-RLN4-410-and-RLN16-410

an other example:

My C1-Pro is HW-Version IPC_51316M:

the firmware i have found ist for RLC-410 with HW-Version IPC_51316M !?!?!
https://support.reolink.com/hc/en-us/articles/900004648143-12-11-2020-Firmware-for-Reolink-IP-Cameras-IPC-51316M-

Why is this product update procedure so fu..... complicated?

best Regards
MM

Hi Bob and Wictod,
Thank you. I will try this with one of the cams today. Can i re-upgrade the cam with the same current firmware again?

I still have another question. In the NVR is an option to reboot the nvr every sunday at 02.00 AM. I have unchecked this, but i received emails from the nvr about video-loss on this time for all the 4 cams. I dont think the nvr is rebooting but the cams do this. How can i disable this?

Thanx
Martin

Hi, my name is martin and i have a nvr system with 4 cameras and a 8-channel nvr recorder.
This system is working without problems and im verry happy about the quality and the 4 shipped rlc-410 and the recorder works great. But a have a questian about the firmware upgrades for the cameras ... i know ... i can upgrade the cameras with a new firmware over the nvr via a local attached usb-drive on all atteched cams and this works allready. My problem is, that all the cams are have the default settings after upgrade this. Is there any way to save the config for all the atteched cams within or via the nvr in any way?
I can export the nvr-settings in a file on my local computer via the windows-client, the settings includes only the settings for the nvr himself. But after the firmware upgrading the cameras there all reseted and the defaults are present. The other thing is ... the cams are becomes an ip address in the 172.16.x.x subnet, which is are different about my local network addresses. I know that is it where is it... no problem.
My questian is... can i save the config for the cameras in any way on the nvr or in another way to reconfigure the cams after a firmware upgrade?

Very Thank you
Martin