@user_702058018922642_702058018922642 I hope my suggestion is worked for you.

Guarantee network availability: Interface the IP camera and the NVR to a similar nearby organization or subnet. This can be accomplished by interfacing the two gadgets to an organization switch or utilizing a wired or remote organization foundation. Design IP camera settings: Access the IP camera's setup interface and dole out it a static IP address inside a similar organization range as the NVR. Make a note of the camera's IP address for sometime in the future. Set up the NVR: Access the NVR's arrangement connection point and add the IP camera as an outer gadget or IP channel. In the NVR's settings, enter the IP address of the camera and determine the proper port number and qualifications whenever required. Arrange video transfer settings: Inside the NVR's settings, indicate the ideal video transfer settings for the camera, for example, goal, outline rate, and pressure design. Guarantee the settings are viable with the NVR's capacities. Add the camera feed to NVR's showcase: In the NVR's UI or checking programming, find the choice to add IP camera takes care of. Add the IP camera utilizing its IP address or via looking for accessible cameras on the organization. Select the camera feed and design the ideal presentation format or view. View the camera feed: Subsequent to adding the camera feed to the NVR, you ought to have the option to see it inside the NVR's UI or on associated screens or shows. The NVR goes about as an incorporated center point for overseeing and showing numerous camera takes care of at the same time. By following these means, you can show the feed from an IP camera on a NVR without straightforwardly utilizing camera ports. This approach use the organization network and abilities of both the IP camera and NVR to send and see the camera feed flawlessly.