My E1 cameras are connected to smart power sockets so that if any of my family members are at home all cameras are powered off for privacy reasons.
When the last family member leaves the house all cameras are automatically powered on.

After power-on the cameras perform a calibration cycle by panning/tilting/zooming.
This generates a motion alarm in the Reolink app for all my family members. If I watch the videos in the e-mails which are send, you can see the cameras panning/tilting/zooming.

My enhancement request is to suppress (motion) alerts while the camera is doing its calibration cycle.

I recently acquired the latest E1 Zoom 4K 8MP model.
Besides the Reolink client & app I also use another monitor application based on RTSP/ONVIF using a non-admin user account.
To my surprise I was not able to add another user account while using the client & app, as this works perfectly on my older E1 zoom and E1 pro models.

Using the web interface of the camera 'user management' is listed under system and I was able to add an additional user account to use for my monitoring app.
After adding a user account and going back to the client & app 'user management' is now visible under system, displaying the message "The current feature is disabled. To add users, please go to System->Share devices.

As far as I understand this functionality it is not a viable option for me as the share devices functionality requires the Reolink client and/or app, and I cannot use the generated QR code in my non-Reolink monitoring app.

Am I missing something or will this functionality added in new versions of the Reolink client & app?