Posts made by yban_61721827297

yban wrote:

I am using Restreamer with my Raspberri Pi 3 and this camera model, with 0 knowledge and some hours reading I can install it; the only problem is that it stops every 9-11 hours, and does not automatically restart the transmission, (but it tries) so it has to be done manually. A pity that the project is abandoned, it is really great and there is nothing similar.

I am streaming my 3 Reolink cameras to YouTube using a Raspberry Pi 3 and ffmpeg. The bad news is that you have to compile ffmpeg on the Pi itself, because there is no installer. The good news is that there are multiple ”cookie-cutter” sets of instructions on the internet. The other good news it that, if you set it up correctly, the ffmpeg software does not do any transcoding, and just forwards the RTSP stream to YouTube, so the CPU utilization is very low. I have one Pi forwarding 3 different cameras to 3 different YouTube channels, and it is still mostly idle:

https://www.youtube.com/user/IAmTheWaterbug/live

Thanks, I already solved it with PC software, although I must recommend Streamer, which has an excellent job right now, I use it sometimes on my Raspberry Pi 3 and it works great, I love your YouTube broadcast, I must say that I arrived at the rapsberry for a tutorial you had left here, thanks again!

Remember to activate UPNP and P2P, do not forget to restart your modem and your camera

What is the correct configuration for "Flash Media Live Encoding" in BlueIirs, is the option to stream to yotube via rtmp, can someone help me?

Just to comment that my camera will be replaced by Reolink, very grateful for his service.

I already bought 4 with this, and all have been very well, the model is the rlc-410, after turning off the camera dries the water and stays well for a few hours.

I do not want to touch anything because of the warranty issue.

Hello good day, I have a problem with the camera (it's new), where can I ask for support or how can I solve it? the camera has water in it, it is like humidity, after a few hours it appears in the lens of the camera, I leave some sample photos of what is happening; the camera is inside my house, it is not where I can receive water of any kind. Thank you.
IMG_5594.jpg
humedad-IMG_5593.jpg

The camera works perfectly thanks; The one that fails is Restreamer, but this one is not for monitoring and recording is only for streaming video. When you combine it with the Raspberry Pi you get it almost as if it were a free PC transmission to Youtube, almost 24/7 except that the transmission is cut every 9-11 hrs

It was only a recommendation, thanks again, the camera works great.

I am using Restreamer with my Raspberri Pi 3 and this camera model, with 0 knowledge and some hours reading I can install it; the only problem is that it stops every 9-11 hours, and does not automatically restart the transmission, (but it tries) so it has to be done manually. A pity that the project is abandoned, it is really great and there is nothing similar.
intro_banner.png

It is possible to add the option to put a Watermark, I would like to add my logo, thank you!