1. Home
  2. Reolink Client & APP


  • It's pretty clear that connecting a device through the QR code or UID relies on a separate, Reolink owned, service. It works fine, but that's a deal breaker for me because if Reolink ever goes out of business or suspends the service, we'll lose the ability to check cameras on our phones. Therefore,
    | Guest
    0
    10


  • I just upgraded the firmware on my rlc-410 poe cameras to the latest version. reset the passwords as you have to do when you upgrade the firmware. now when ever I access the cameras through my reolink android app version 2.3.77, the frames on my reolink pc client start displaying just a white screen
    | Guest
    0
    2


  • I've been using the iOS app (currently 3.3.26.97 as of this writing) and noticed some behavior that is less than ideal. Wondering if anyone else has noticed this or if the developers can test/fix. I have a Reolink camera at home (RLC-422) and my iOS app has the connection information for it stored.
    | simonlai79_37225917016
    0
    2


  • I have the 4 camera system with an NVR and WiFi cameras. So far I have 2 cameras installed but only camera 1 will show up in the mobile app on my phone. What do I need to do to add the second camera? I can see both cameras on my tv so I know they are both hooked up.
    | Guest
    0
    10


  • Hi - First I would like to say that you did a good job with the recent update to the mobile app. I would like to suggest something. Is there anyway to come up with an easier way to playback your motion recordings on your mobile device? Maybe you could setup a section in the mobile app dedicated t
    | dljustice88_12964438366
    0
    7


  • Ever since this new update I cannot view any cameras, and it introduced some weird bugs. I now see what looks to be Chinese characters on the icons. Can no longer scan for a device on the local LAN. 2017-03-15_14-29-22.jpg
    | Guest
    0
    7


  • Hi All I have an 8 channel NVR with six cameras recording to it constantly. It's been a while since I've looked at the desktop version of the Reolink app, but if I remember correctly, it shows both "normal" recording, aka the 24/7, and motion detection recordings. However, on the app, when I go to
    | npcarling26_28371092250
    0
    2


  • I have an issue on playback from the NVR. I started with the RLK8-410B4 and have added three more RLC-410 and one C1 wireless. The system has been working well, except; I am trying to playback one camera feed at a time, full screen, in CLEAR mode, but the Reolink Mac Client (Ver 3.3.11.42) quits une
    | borealnvr_14608246218
    0
    2


  • I am trying to download a section of footage. I have "audio" enabled. When I download the file I get no sound. When I use the playback feature I hear the sound. I have tried downloading from the MAC Client software and iPhone App. Both only download the video without audio. Im obviously overlookin
    | Guest
    0
    4


  • Im sure its not that hard to provide an APC file so I can use it on my Firestick to monitor the cameras.
    | ronnie_c364_8612755653
    0
    1


  • I have two Reolink systems, both are RLN4-210W. I have an Android phone with the ReoLink app, version 2.2.8.2. I have one device added successfully, can view all four camera's, no problem. When I add the 2nd device in the app, I can view the camera's at first until I exit the ReoLink app. When I re-
    | Guest
    0
    5


  • I need 16 cameras for my hikvision 4k nvr and was thinking of using reolink for most of them.... Has anyone gotten a reolink camera to work with hikvision nvr? If yes, is it fully functional? What were any issues you had setting it up? Thanks for taking the time to respond to me
    | Guest
    0
    1


  • Does anyone know if Reolink cameras are compatible with a Hikvision DS-7608NI-E2/8P NVR? I have already purchased the cameras and the NVR, but I cannot seem to get them to display. The NVR recognizes that the cameras are plugged in but does not display an image. All I get is a warning triangle sayin
    | Guest
    0
    3


  • Hi there, I am unable to access any local playback thru the client software. It records videos and saves them to C:RecordFile, but nothing shows up in the playback mode. Any help is appreciated. Thanks, Nick playback.png
    | Guest
    0
    6


  • After downloading the update of the latest version of the iOS app, when attempting to call certain presets, for example "living room", the kitchen preset gets called. But then if I call a different one, such as "back door" it works, then "living room" works as expected. Anybody else experiencing any
    | npcarling26_28371092250
    0
    1


  • I have RLC-410 and my purpose is to use it with ZoneMinder. I had some issues so i updated to the latest firmware that gave my an IP based user interface which was a welcome addition but rstp used to work fine prior to the firmware upgrade and now no matter what client i used (same url that used to
    | Guest
    0
    3


  • Upon installing the last 2 Windows Client versions I have been unable to use the client because the screen size of the application is too large for the desktop. Is anyone else having this issue, I am running windows 8.1 with a screen resolution of 1920 x1080? Does anyone know a work around? Version
    | davee223_16134981217
    0
    7


  • Hi, I have bought aReolink system with 2 wireless cameras and nvr. The problem I have is that I can't connect remotely using the iPhone app. It is fine when I am at home using wifi but when using 4G it can't connect. As the host I am using my IP address and the port is 9000. Both the username and pa
    | Maarten_17823203087
    0
    5


  • I hate the fact that reolink app does not block apple auto-lock. Basically if i am viewing the camera, i dont want my screen to lock for power saving. But i also dont want to change the global iphone setting for this which affects all apps. Anyone else is having this problem? Support told me they to
    | Guest
    0
    2


  • The Driver makes Reolink cameras integration with Control4 easy and simple! Thanks to their great team @ghctim, more and rich features and functions are made accessible for more users. Check out more information on https://www.houselogix.com/shop/reolink-camera houselogix-driver-announcemen
    | Guest
    0
    1

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now