1. Home
  2. Reolink Client & APP


  • I’m trying to share my Argus PT with a neighbor. On my end, everything works fine. Argus PT has been great for over two months. I’m looking at pedestrians, vehicles, etc., panning and tilting, etc., day, night, etc., reviewing recordings, etc. So I send neighbor this URL, they install app, then I s
    | Ken
    0
    7

  • This topic is deleted!

    I successfully made accounts for other family members to view the cameras installed, but since I installed my trackmix I do miss something here. As the admin I can set preset points and call them. The users can't call them. I don't want to assign admin perms to these users just to let them call the
    | breit2001_513813039153374
    0
    1


  • I have set up the camera so that it e-mails me with any motion late at night and it works. But quite often the clip is so short (seems limited to 1Mb only) that it misses what is about to happen. I did then look to see what was recorded in playback but nothing is there. I have looked at the setting
    | neil_chaplin_is_450076909830276
    0
    2


  • I have problems viewing 3840x2160 mode in my android app. I have a Samsung S22+ phone. I can play in all other modes but when I use the 4K mode it just loads the kbps and I get no picture. The problem is the same whether I use wifi or 4g+. My nabo has the same setup as I have and don't see proble
    | tabertelsen_537234902716544
    0
    3

  • This topic is deleted!

    I have the 4mp Wifi Duo on my house server recording movement / People without SD card via PC app just fine however I set up my email notify and it keeps sending like every 5 minutes and I have no recordings on my drive.
    | A Former User
    0
    1


  • Dear forum members, first posting, therefore a hello to all you members from me. I would like to display certain data like weather information into the stream. Is there a way to set a string via API? Let's say change the camera name with my information? Thanks for any replies
    | user_594083365412944_594083365412944
    -1
    2


  • New owner here. I think my issue is network. I try to scan the QR code on my app but I get a connection error. i have a net gear wireless router, I installed a Wi-Fi extender which is located next to nvr. I’m using the lan port on the extender to connect to nvr. I don’t think I’m setup correctl
    | Simon_594707925737544
    0
    2


  • Why does NVR not show alarm clip video preview like the cameras that just have SD cards in them? The NVR just shows the little indicators as to what type alarm it is but no preview video in the square. The stand alone cameras with SD card in them have both a horizontal video preview (also with the
    | user_589206260232282_589206260232282
    0
    2


  • Does anyone have to hit refresh several times to get the list of recorded videos? Thanks (Argus PT 2k)
    | user_594808079581271_594808079581271
    0
    1


  • For two days now, Google no longer connects to Reolink. As a result, I can no longer see the cameras in Google Home. Error message: Can't reach reolink smart home. I then removed the connection between Google and Reolink, only to add it again. But that is not possible either, same error message. Doe
    | Micha_298221203722435
    0
    15


  • I just setup a Argus 3 Pro today and am getting frequent false motion notifications. I can not tell what is causing the false alerts. Attached is a photo of the camera view I am trying to stop the false notifications while keeping a working sensitivity level. What can I do?
    | user_593207038242940_593207038242940
    0
    4


  • Hey! So I have a Reolink 510A connected to my router. And in my Home Assistant I use the fwestenberg Reolink integration. And well everything works fine. I get the feed into HA. But I just cant get the person movement to report to my HA reliable. As you can see in the picture here the camera actuall
    | aglader85_450503121047736
    0
    4


  • I have an old Motorola Moto G3 cell phone running Android 6.0.1 (Marshmallow) which I keep exclusively to alert me if a person is detected from one of my cameras. It's the most critically important of my cameras and I need to be able act quickly if an event occurs. I need it to play a very loud int
    | pdownes2001_384636162646205
    0
    10


  • Hi. its just me or its bug. need always tap 2 or 3 times then it back to normal loading videos
    | efkka31_552667676168378
    0
    7


  • I am unable to add a remote NVR to a window client (v8.7.3) via UID. It adds perfectly to the mobile app. It prompts for a password on the mobile app, but doesn't seem to do that on the windows client. I've tried adding the NVR on multiple computers with the Windows client and none of them prompt
    | office_542567929233639
    0
    2


  • good morning, there is a problem that has not been solved, it is the following, when we use the application outside the house, either by wifi or by 4g, when using the application if it is minimized, when starting again the cameras do not load. you need to close the app and start again. I find this
    | ramms_119
    0
    11


  • How am I able to delete a Camera name for an unused camera that is no longer connected to channel #7 I do NOT see any camera name when viewing through the NVR directly, but see this camera name displayed on both the Android app as well as my Windows Desktop app. I have attached a picture. Thanks.
    | bbugaski_390328908112013
    0
    8


  • Hi, I am struggling with blocking issue with my Argus 3 Pro and Android app. Camera was working fine but I needed to connect it to different networks during travel. At some point I could no longer remove it from the app to add it to the different network. Right now I tried reinstalling android app,
    | mmspock_556244821225708
    0
    2


  • Hello i have the version 8.7.3 installed and the camera freeze all the time, i have to shut the application and launch it again for them to work ... for just a while and freeze again ...
    | jeanmichel francois_314337194614920
    0
    6


  • Greetings, The Reolink Client for Windows has just updated to version 8.7.1. I noticed a new option. When I click Client Settings > General, There is an option called "Scrollview Time", which is currently set to 10 seconds. What does this do? The manual doesn't have this option. It hasn't been up
    | Shane
    2
    3


  • |

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now