-
I have the latest firmware and I can access the camera on the ios app. For some reason, I can't access the camera from a browser. Any ideas? I've reset it with a pin in the reset port (on the camera). The reset did work, I was able to scan the qr and add it to the app. I see that it is connected to my network and shows the ip address. When I try that ip in the browser, it says can not connect. I tried http and https. I don't see any settings for the web interface in the app... I've also tried pulling the power on the switch it's connected to, but no luck.
Any help would be greatly appreciated, I use this in Blue Iris, Scrypted and Home Assistant. I need to open the onvif settings.
Thanks!Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@user_679874117488786_679874117488786 Check that HTTP (80)/HTTPS(443) ports are enabled. Go to Network, Advanced and setup.
-
@user_679874117488786_679874117488786 I have the same issue. I can't access the trackmix camera from the web page, but I can access all my other cam models from the web page. I have https enabled and I have tried http etc. The camera works fine in the clients and NVR. My camera is not behind my NVR.
However, until this is fixed you can turn on onvif from the desktop client settings. (I used the macOS app) -
-
@user_679874117488786_679874117488786 Same issue.. One of mine stopped letting me access the web interface the other is still working..
-
@user_679874117488786_679874117488786 This is still an issue. Is Reolink going to fix this?
-
@cthreepoh_636415470858361
No, because they've removed the ability to access it by the web interface.
https://support.reolink.com/hc/en-us/articles/900000788286-Which-Cameras-Cannot-be-Accessed-via-Web-Browsers/ -
@cthreepoh_636415470858361 I have the Reolink TrackMix WIFI and I am able to connected through Chrome. The general rule is that battery operated cameras cannot be connected through a Web Browser.
-
hi. you are not alone. we are having refused sessions trying to access http or https. even though enabled port access on the cams settings.
Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@user_612890927030348_612890927030348 Please kindly submit a request here, https://support.reolink.com/hc/en-us/requests/new/, and our team will get back to you very soon.
-
I have the same issue with 2 Trackmix PoE Cams.
They work great in the app but I can’t access them with the browser (Safri, Firefox) or with Home Assistant.
Is there a solution for this issue?Reply QuoteShare0- Share this Post
-
copy the link
Copied!
-
@user_817468512288967_817468512288967 I have the WIFI TrackMix and able to log on using Webui. The only issue is to play h.265 which Reolink failed to update. Make sure that https is enabled from networks/advances/server settings.
-
I bought last month a Track Mix and it was the first Reolink cam without enabled web server.
I can ping it, home assistant can see it, but no access at all (only with iOS app).
But absolutely no advanced network settings in the IOS app. (no access issues within the IOS app, all good)
Can't access Trackmix PoE web interface
-
I have the latest firmware and I can access the camera on the ios app. For some reason, I can't access the camera from a browser. Any ideas? I've reset it with a pin in the reset port (on the camera). The reset did work, I was able to scan the qr and add it to the app. I see that it is connected to my network and shows the ip address. When I try that ip in the browser, it says can not connect. I tried http and https. I don't see any settings for the web interface in the app... I've also tried pulling the power on the switch it's connected to, but no luck.
Any help would be greatly appreciated, I use this in Blue Iris, Scrypted and Home Assistant. I need to open the onvif settings.
Thanks! -
hi. you are not alone. we are having refused sessions trying to access http or https. even though enabled port access on the cams settings.
-
I have the same issue with 2 Trackmix PoE Cams.
They work great in the app but I can’t access them with the browser (Safri, Firefox) or with Home Assistant.
Is there a solution for this issue?