Broken Camera??

[Dick_5625631838]

One of my RCL-410 cameras has stopped working??? No longer get a link light. Have tested hooking directly to Poe router, still no link light??

[Guest]

Dear Dick,

Pls follow below steps to do the trouble shooting:
1. Make sure the power output for your POE router is above 5.5W.
2. Pls cover the daylight sensor to check if the camera is power on

[Dick_5625631838]

Have checked all... still no link light. Power injector is attached...

[Guest]

Dear Dick,

1. Pls make sure the POE injector is standard with 802.af/802.at 48VPOE. Power output for each port should be above 5.5W.

2. How about the network connection? Do you use the default ethernet cable or your own cable? If with your own cable, pls check if it is 8pin with below order:


3. And you may also try different poe port.