RLN8-410 LAN-Ports

[user_811133148405946_811133148405946]

Hello,

I got a question about the RLN8-410.

It has 4 PoE Ports and one "LAN" Port. I can connect 3 cameras to the PoE ports. The problem is the 4th camera. This would be powered using a separate PoE injector and the LAN port would be connected to a AVM Repeater (via LAN Port), which is connected via a LAN cable to the inhouse-switch, which goes to the LAN Port of the RLN8-410. (I hope this explanation makes sense)

Would this work?

Are the 5 ports of the RLN8-410 routed like a normal switch (were 4 ports are just PoE able), or are are the LAN and Cameraports 2 separate interfaces?

[joseph_1979]

@user_811133148405946_811133148405946 You have 8 POE ports which should be connected to the POE cameras. The LAN port should be connected to the BB router or the switch (which is connected to the BB router).

If the 4th camera is not poe, then you can connect it to the switch. NVR will detect it provided they are on the same subnet.

[joseph_1979]

@joseph_1979

[user_811133148405946_811133148405946]

Cool, thanks for the reply.

to connect 3 Cams directly is no problem. But it would be a hassle to connect the 4th with a seperate cable. It's quite long and goes thru many walls etc. But if I can PoE Power it seperatly and pipe the signal over the Home-LAN it's perfect