Event detection mapped to user configured zone markups

Ben

Re: Multiple detection zones

To extend several similar requests so far, it would be great to accommodate the following:

Detection Alarm: User configured zone markups

Add the ability to markup multiple zones of interest for a camera
The zones can be configured as "non-detection", "detect-only" or "detect-and-notify"
All existing alarm settings are respected within the defined zones

Surveillance: Silence events falling within "detect-only" zones

Don't send notifications (Push/Email/Buzzer) for detect-only events as determined by configured zone boundaries
Optionally: Add surveillance option for "detect-only" events to be active or not, and have some level of configurable API settings

Published events (via APIs?):

Detection events will contain additional zone markup metadata if available. e.g. zone Id/tag of the zone(s) to which the event falls within for the camera.

Related Reolink App enhancements (Optional): In-app event metrics for user defined zones + filtering by zone id/tag

Add UI ability to display event counts per zone for cameras. E.g. Diveway Camera: Vehicles on Driveway (zone1) Vs Vehicles on Street (zone2)
Playback filters could also filter events by configured user zones

Without the above features

Multiple cameras are required with the same field of view to differentiate areas
You cannot easily differentiate between events of significant interest (closer proximity) to those of potential interest (surrounding areas)
Significant manual review is required to sort between all detected events (even if categorised by vehicle/pet/person)
Non-detection zones eliminates the simple identification of events of potential interest (assuming you've had to mark these areas of interest out due to event noise).