Atlas PT Ultra Troubles

MikeyLikesIt

i just setup 2 atlas pt ultra's and running into some finicky problems. The main issue im having is with one setup as a driveway cam and home hub, it does not record when a vehicle pulls into the driveway, by time it records the person is already out of the car, even with the pre-recording setting turned on. However, if cars pass by it will record every time. The second camera is by a door and acts similar but for a person, they can walk past the cam and not get picked up until halfway past its viewing capability, like the camera lags recording and pan/tilt tracking. Ive messed with sensitivity settings even at 100 it still does the same.

Second issue is both of these cameras loose their correct monitor points. I found that if you try to move to any of the camera's physical limits, like a side or up/down, returning to the monitor point will be shifted in that direction. Like its moving the camera beyond its stopping limitation. Ive been using for almost a week at this point, aside from that they are both great cameras so far. I replaced an argus track and argus pt ultra.

harllock

Bought the Atlas Pt Ultra and after 2 months it stopped charging even if plugged to a usb it will not pass 1% and it seems others have had the same problem.

user_956463287464132

I’ve also been testing the Atlas PT Ultra and noticed some similar quirks. Motion detection sometimes kicks in too late. even with sensitivity and pre-recording maxed out. I found it helps slope a bit to tweak the detection zone so the camera triggers earlier. Though it’s still not perfect. As for the monitor point issue, mine also drifts when hitting the pan/tilt limits. so I think that might be a firmware/software bug.