Reolink 410W

[valbuz_149539658739946]

hi

i want mounting this camera on a wall.
is it possible to "de-attach" the ethernet cable? so i must do a large hole in the wall for all the cables....
i want only take the power cord to the wall.

thanks
pat

[judithwallker_152073482744063]

nice question

[valbuz_149539658739946]

correct!

[Carl_31331526639]

You can connect the camera to the router and set up the WiFi for it. Then you can disconnect it from the router after you pass the WiFi test and mount this camera on a wall. Refer to Set up WiFi Settings for WiFi Cameras. But you need to remove it from the wall and reconfigure the WiFi via ethernet cable if it disconnects the internet someday.
Sorry for any inconvenience caused to you. Thank you for patience and understanding.

[valbuz_149539658739946]

Hi Carl
thanks, i know the process to install/config the camera.
it's only the problem for the mounting on a wall.
when you want to put the completely cable into the wall, it must be a "large" hole in the wall for all the connectors....
so after configure the cam it was better you can remove the complet cable from the cam.
you must then habe only a little hole for the dc cord....

pat

[Carl_31331526639]

Hi Pat
I understand the inconvenience you met. But cutting the ethernet cable will void the warranty and affect the usage of the camera. We suggest you install the camera in the normal way. And maybe you can consider the battery-powered camera next time which is totally wireless and easy to install. For more details about the battery-powered cameras, you can send an email to support@reolink.com for further assistance.