Introducing Our New Forum and New Mods to You
NVR New Firmware with Pet Detection
Duo 2 Firmware Update and Tips: Better AI Detection & Email Alerts
New Client with Time-Lapse Function and Hardware Decoding
Duo 2 Tips: Recommended Installation Scenarios & Settings
I have a:
Based on how the NVR is configured (by default remote access is permitted), you do not need a static IP. If you have the NVR set to PnP which uses a P2P protocol to reach the NVR, the app will find the NVR no matter where you are. But this is accomplished by sending some data and details to the vendor so they know how to reach the cameras when you are not on your local WiFi; like a reverse proxy. Some people do not prefer this for remote access so the go with the second option. I use a personal VPN which does require that I have a static IP or use something like Dynamic DNS (DDNS) to access my local network while away.This also depends on many other factors such as what you are or are not blocking from going out your network router. You need to make sure the necessary protocols are permitted and there are no issues with internal routing or NAT that may get in the way of access.
You may change the ip address of the camera in Reolink Client into static. Or you may log into the administrative page of your router to do the address reservation for the camera. Then the ip address of camera can not be changed anymore.
Yes, you are right. If you don't want to the IP address of your camera changes casually, you can assign a static IP for it. 1. Log into your camera. Go to Device Settings -> Network -> General.2. Select Static as Network Access.3. Change IP and remember to click OK to save.
You can change your IP with VPN. You can visit my blog (URL) and read more.
You can use opera browser and hide your privacy easily. dino runvpn-screenshot.jpg
Thanks for sharing, if there is any other assistance needed please kindly contact us on firstname.lastname@example.org
Hi there! Join the Commnunity to get all the latest news, tips and more!