Share Your Local Security Installation to Win Cameras
Get Your 25% OFF for Local Storage NVR Kit Now
Talk About the Local Storage: Pros/Cons and Local Storage Options
Bringing Up New Products Check Out What's Coming Next
Where to install the 360° Reolink Fisheye? Here are recommended Positions
I am using the free IP Camera Viewer software (only have 4 cams to watch) and the Reolink Client crashes my small system when i add 3rd camera. However, I am using the RLC-422 Dome camera and it's not listed in the software. Is there a "compatible" camera model/brand I can use that will work in the format?
Has anyone gotten a rlc-423 to work with IP CAMERA Viewer app? I have even been in contact with Robert Chou and to no avail. Support has been no help either.
On Ch.# need to write media port, by defoult 9000
Works half assed. I need to be able to get to it from outside my lan using my internet IP address..
Then You need to use/write WAN IP
Putting in WAN UP does not work at all.I challenge anyone to show me it works.
All Reolink ports must by open on the router. For my this app works without problems.
Got it to work with rstp setting but not http/onvif. But no PTZ. IF I had known how incompatible it was I would have bought another camera.
Try Reolink app.
That defeat the purpose of having one app for all my IP cams.
Hello;With IPCamViewer Pro I can use Original Réolink RLC-420-5MP => IPCamViewer configured With IP externe and server Port Non SSL and RLC-410 Original Réolink RLC-423 => IPCamViewer configured With IP externe and server Port Non SSL and RLC-410Original Réolink C2-Pro => IPCamViewer configured With IP externe and server Port Non SSL and RLC-410it work correctly ....but with original Reolink RLC-823A and RLC-823A it's not possible to configure the cam in IpcamViewer : No preview video available ???Dit you have informationsThanks
@hybris_504591858819267 Hi there, the ONVIF/RTSP ports are disabled by default with the latest firmware on the 823A camera. You will need to go to the port settings and re-enable the ONVIF/RTSP ports for third-party software integration. Hope this helps.
Hello, Lorenz,Thanks for informationI active ONVIF/RTSP on 823A ... But i don't undestand how configure this new caméra on IpCamViewer ... In my message Old cam Réolink RLC-420-5MP , Réolink RLC-423, Réolink C2-Prowork correctly with private Ip and Private Port of each cam ...Thanks
@abommaro_373_360329751683201 Thank you for the feedback. It is possible that the third-party software won't accept the H.265 codec as the RLC-823A comes with H.265 video format and the 420, 423, and C2 Pro with H.264. To stream the video feed to the third-party software, you will need to use a substream and switch the video codec to H.264. Click here to learn more about the RTSP URL in substream, https://support.reolink.com/hc/en-us/articles/360006240073-Request-for-RTSP-URLHope this helps.
Hello, Thanks for informations ...I have a lot of questions : I read information : https://support.reolink.com/hc/en-us/articles/360006240073-Request-for-RTSP-URLand i try to use VLC :With Reolink RLC-420-5MP H264 Ip : 192.168.1.120 I try to use rtsp://admin:firstname.lastname@example.org:554//h264Preview_01_mainIt does't work.Port 554 RTSL corretly set.With Reolink RLC-811A H265 192.168.1.120rtsp://admin:email@example.com:554//h265Preview_01_mainIt does't work.I try to use IpCamViewer Android With Onvif Config ...With Reolink RLC-811A H265 192.168.1.120RSTP : 554OnVif : 8200 ..It work correctly in local mode with Ip Adress : 192.168.1.120But with external accès (My own ip Adress Box) It doen't work ...Port 8200 Check : Port open ...Can you help me ... Thanks ...
@hybris_504591858819267 Have you upgraded your firmware to the latest version? You can try to download the firmware on our download center and upgrade the camera with the latest firmware to try again. If it still can't work, you can contact our support team and our tech will help you with this specific case.Submit a request – Reolink Support
Hello,All my reolink Cam upgrate to last version :RLC-811A => 647RLC-823A and RLC-811A => 956 ...I send message to support team to help me ..Thanks ...Hybris
Hi there! Join the Commnunity to get all the latest news, tips and more!