Details on the RLK16-410B8 NVR

qb

Specs mention there are 2 SATA Slots.
Q: so I can install 2 SATA Drives?
Q: is RAID (specifically MIRRORING) supported?

Max Capacity of 8TB is mentioned

Q: is this PER SATA SLOT or is does this mean a limit of two 4TB drives???

Nothing is mentioned about MAXIMUM RECORDING RESOLUTION vs number of cameras
Q: Can all 16 cameras with 4MP resolution be recorded at full resolution at the same time?

thank you

qb

Oh and two more
Q: are other brand cameras supported?
Q: is the NVR ONVIF camera compliant?

Reolink

Q: so I can install 2 SATA Drives?
A: Yes.

Q: is RAID (specifically MIRRORING) supported?
A: The most common used HDD is Western Digital and Seagate. RAID can not be supported.

Max Capacity of 8TB is mentioned

Q: is this PER SATA SLOT or is does this mean a limit of two 4TB drives???
A: It can connect 2 internal HDD, each 4TB, totally 8 TB. Additionally, there is an E-SATA connector for external HDD, also 4TB supported.

Nothing is mentioned about MAXIMUM RECORDING RESOLUTION vs number of cameras
Q: Can all 16 cameras with 4MP resolution be recorded at full resolution at the same time?
A: Yes. It can record 16pcs of 4MP cameras with 4MP resolution@30fps at the same time.

Q: are other brand cameras supported?
A: No. The system can only work with reolink cameras.

Q: is the NVR ONVIF camera compliant?
A: No. The NVR can only support reolink cameras.

qb

Wow - thank you for the quick answers. All was looking good until the "no" answer to ONVIF support question. Kind of a killer, IMO.

thank you again.

I was told by ReoLink you can use 2 non-reolink cameras with this NVR. I this NVR and I have hooked one off brand camera up once and got it to work. But firmware updates could have changed that since I tried.