How to access the nvr system via lan

[merlin1 1_245860427702493]

how can i access the nvr system interface over the network?
i don't mean the standard gui that i have via app on mobile and laptop, but the system interface that i see when i connect the hdmi cable of the nvr to the monitor.

thank you.
merlin

[schonuf]

@merlin1-1_245860427702493

The TinyPilot Voyager (KVM over IP) might work. I have been considering purchasing one myself, but I have not independently tried it. Please let me know if you try it and it works.

[Reolink Lorenz]

@merlin1-1_245860427702493 Hi Merlin, you may try to follow this guide and access the NVR system via a web browser, https://support.reolink.com/hc/en-us/articles/360003981973-How-to-Remotely-Access-Reolink-Cameras-via-a-Web-Browser. Hope this helps.

[merlin1 1_245860427702493]

@merlin1-1_245860427702493

The TinyPilot Voyager (KVM over IP) might work. I have been considering purchasing one myself, but I have not independently tried it. Please let me know if you try it and it works.

Uh, thanks, but sorry.. 400 Euros for try the TinyPilot Voyager is much too expensive.

[merlin1 1_245860427702493]

@merlin1-1_245860427702493 Hi Merlin, you may try to follow this guide and access the NVR system via a web browser, https://support.reolink.com/hc/en-us/articles/360003981973-How-to-Remotely-Access-Reolink-Cameras-via-a-Web-Browser. Hope this helps.

Thx, but sorry.. that is not my problem. I need access to the system-site of the NVR. The site, you see, when you connect NVR to a screen. I dont need remote access.

[Reolink Lorenz]

@merlin1-1_245860427702493 I am sorry that there is no way to show the NVR UI over the network. The NVR UI will only be available when the NVR is connected to a monitor. Hope this clarifies.