Use two-way audio on RLN8-410-E and Reolink App

[unkn]

This post is deleted!

[Reolink Fiona]

@amir-kolahchi_548512805965980 Hi there, if you connect the RLC-811A directly to the RLN8-410-E, the two-way audio and siren are not able to use. If you do want to use these functions, you can connect the camera to a PoE switch, which is under the same router as the NVR. Then you can add the camera both to the NVR and the Reolink APP as a standalone. In this situation, you can use these two functions and record to the NVR at the same time.

[unkn]

This post is deleted!

[Reolink Fiona]

@amir-kolahchi_548512805965980
Please make sure that the PoE injector/switch is 802.3af compliant (48V) and supports active mode.

Yes, you can record the camera to the NVR and use the speaker in the APP as a standalone camera.

[unkn]

This post is deleted!

[Reolink Fiona]

@amir-kolahchi_548512805965980
Can you try to connect the camera like this?

[unkn]

This post is deleted!

[Tomáš Kupr_495117657354378]

@Reolink-Fiona Please, why can't the siren be set when the device is connected to the NVR? Can't this feature be added? Via PoE the settings for the siren work.

[Reolink Fiona]

@amir-kolahchi_548512805965980 When you set up the camera password, you need to input the camera password in the NVR. Click the "modify" on the NVR monitor first.

[Reolink Fiona]

@tomáš-kupr_495117657354378 What's your NVR firmware version and hardware version? You can upgrade your NVR firmware to the latest version v3.0.148 if your hardware version is H3MB18/N3MB01/N2BM02. Then you will see the siren function. Please download the firmware on the download center, Download Center – Reolink.

[unkn]

This post is deleted!

[Reolink Fiona]

@amir-kolahchi_548512805965980 Please try to follow this guide, https://support.reolink.com/hc/en-us/articles/360004346714-How-to-Make-Reolink-WiFi-Cameras-Work-with-Reolink-PoE-NVRs.

You can just click and drag the slider to the right to input the password.

[unkn]

This post is deleted!