RLC-823A 16x Autofocus works bad when full zoom

[Janser Dienstleistungen GmbH_257000373518575]

Just tested the new RLC-823A 16x - unfortunately the Autofocus does not work properly when in full zoom.. It never finds the correct setting by itself but when doing it manual it is possible to set it correctly.

In general on the RLC-823A and RLC-823A 16x: the autofocus works very slow and especially with the 16x version the focus setting should be saved with the preset position as well so that all is set when a preset is activated.

Would be great if this could be optimized in next firmware version and please make the 16x firmware also available online.

Firmware: v3.1.0.2040_23041423_v1.0.0.93

[kubansad_148792540770515]

I completely agree, there is also an autofocus problem with automatic day-night mode change and simultaneous camera movement, changing the camera position interrupts autofocus

[Janser Dienstleistungen GmbH_257000373518575]

...any answer or comment from @Reolink-Fiona or @Reolink-Frazer on this?
I am still waiting for the RLC-823A 16x to be listed on the firmware download site.

[tom_498320825041125]

@janser-dienstleistungen-gmbh_257000373518575 a new firmware update just dropped.

[kubansad_148792540770515]

I don't see the 16x update in the firmware list

[user_657691325403182_657691325403182]

For what it's worth, My 16x will autofocus at full zoom, but fails when at partial zoom. I can also set focus manually, but the focus point is not consistent. For example. when I return to the Monitor Point, Autofocus fails. When I manually refocus, sometimes the setting that works is "966" and sometimes it's "978". I expected a little slop in the values, but that seems kind of large.