Reolink Year in Review 2023
How ColorX Technology Turn Night into Day
Reolink App v4.43 Released
Hi everyone,I have a prob with my Argus2 which I want to use at my home now.It was installed at another WLAN but connection was not possible for some days, so I decided to take the camera to my place, charge the battery and setup the camera with my WLAN at home.I get a green light at the battery which shows it is fully loaded but when I try to connect to the camera after I scanned the QR code of the cam nothing happens. Even pushing the reset [censored]on does not make the camera talk at all.I wonder if the camera is dead and needs to be replaced.I only have one battery, so I cannot try another battery on the camera.Should the camera make any sound when the battery is connected? Should there be a led lit on the front when I insert the full battery?I only have one Argus2, so I have no chance to compare the behavior with a working camera.Thanx a lot for your help. I also contacted support alredy but did not get a reply yet.Dee
Hi Ricky, please refer to Learning the working mode and the LED status on the Reolink Argus/Argus Pro/Argus 2 to check the working status.
Hi Carl,thank you very much for your reply and your suggestion.As usual I was looking for the problem on my side, but in this case the camera was defective. It stopped working without any change of network or setup just by itself. I took the camera home to test it, but it had an intermittend occuring problem.I received a replacement which is working fine.Best greetingsDee
Hi there! Join the Commnunity to get all the latest news, tips and more!