@joseph-chircop_497308027822318
unfortunately that did not work either  
but thanks for tip again

I have another Reolink cam in use which also works for years without any problems.
The Argus 2 I also had years in use, they have then no longer needed and they lay half a year around, now I wanted to use it again, but unfortunately it somehow no longer works

@joseph-chircop_497308027822318
Thanks for help
I will probably buy a new one then.

@joseph-chircop_497308027822318
Yes had disabled the wifi in the iphone.

Charged the battery separately, but still does not connect properly.  
The contacts look good.

@joseph-chircop_497308027822318
I have removed the repeapter, but without it unfortunately does not work.

With an Iphone opened a hotspot and tried with it, but the same problem as with the router, the camera connects and disconnects directly again and that every second.

But thanks anyway that you want to help me.

@joseph-chircop_497308027822318
i have unlocked everything i could, unfortunately the camera does not connect despite factory reset.

this is how it looks in the fritzbox

ReolinkArgus2 Wifi Exposed Host
connected with fritz.repeater 192.168.1.200 itself. Port sharing allowed 2.4 GHz

Hello,

I've been trying to connect my Argus 2 to my wifi for days, but it just doesn't work. (Encryption is on WPA 2 CCMP)

The camera only flashes blue red. This also shows up in my Fritzbox and gets assigned an IP, but does not connect properly, so the camera says "successfully connected". Pinging also works via cmd. Have already tested various Wifi networks (second guest Wifi opened, only 2,4Ghz Network, hotspot, etc.), the camera often reset to factory reset. Always the same problem.

I really do not know what to do, maybe you have a tip for me.

Thanks a lot