Can not connect Argus 2 with wifi

[user_683244414582984_683244414582984]

Hello,

I've been trying to connect my Argus 2 to my wifi for days, but it just doesn't work. (Encryption is on WPA 2 CCMP)

The camera only flashes blue red. This also shows up in my Fritzbox and gets assigned an IP, but does not connect properly, so the camera says "successfully connected". Pinging also works via cmd. Have already tested various Wifi networks (second guest Wifi opened, only 2,4Ghz Network, hotspot, etc.), the camera often reset to factory reset. Always the same problem.

I really do not know what to do, maybe you have a tip for me.

Thanks a lot

[joseph_1979]

@user_683244414582984_683244414582984 Camera supports WPA2-PSK, WEP (ASCII) and WPA-PSK. The last two modes are not recommended.

I think your issue is that the camera is unable to access the Internet (both directions - even from Reolink servers). Since it got the IP from the DHCP of the router then you need to check if there is any FW rule on your router. Perhaps you need to configure the port sharing. Check this out.

[user_683244414582984_683244414582984]

@joseph-chircop_497308027822318
i have unlocked everything i could, unfortunately the camera does not connect despite factory reset.

this is how it looks in the fritzbox

ReolinkArgus2 Wifi Exposed Host
connected with fritz.repeater 192.168.1.200 itself. Port sharing allowed 2.4 GHz