I have an NVR RLN8-410-E (H3MB16) and I was wondering when (or even if) the version 3 of the firmware will be available?

I have just upgraded my cameras (RLC-4105MP) to version 3 (3.0.0.136.20121100) and I would like to keep the versioning the same across devices.

Is version 3 of the firmware for H3MB16 NVRs' going to be released anytime soon, just so I know whether to hold my breath or not?

Thanks.

Firstly, this relates to the fo.lowing unit:

• Model: RLN8-410-E
• H/W Version: H3MB16
• Firmware Version: v2.0.0.280_21060101

I know there hasnt been a firmware update in some time and there will probably never be another, unless there is some kind of security breach when Reolink are forced to do one, but i was wondering a couple of things as follows...

1. How can you continue to sell an obsolete product as sold on Amazon?
2. Will there ever be an upgrade to the "New UI" for this particular NVR?
3. Will there ever be support for 3rd party cameras using RTSP/ONVIF as per your instructions here for this particular NVR?
4. Will the link, How to Set up Reolink Ports/Server Settings on Reolink NVR (New UI) on the Reolink NVRs, as specified in the aforementioned page ever be corrected?

I think I know what most of the answers will be, but we shall see.

Firstly, this relates to the fo.lowing unit:

• Model: RLN8-410-E
• H/W Version: H3MB16
• Firmware Version: v2.0.0.280_21060101

I know there hasnt been a firmware update in some time and there will probably never be another, unless there is some kind of security breach when Reolink are forced to do one, but i was wondering a couple of things as follows...

1. How can you continue to sell an obsolete product as sold on Amazon?
2. Will there ever be an upgrade to the "New UI" for this particular NVR?
3. Will there ever be support for 3rd party cameras using RTSP/ONVIF as per your instructions here for this particular NVR?
4. Will the link, How to Set up Reolink Ports/Server Settings on Reolink NVR (New UI) on the Reolink NVRs, as specified in the aforementioned page ever be corrected?

I think I know what most of the answers will be, but we shall see.

I have an NVR RLN8-410-E (H3MB16) and I was wondering when (or even if) the version 3 of the firmware will be available?

I have just upgraded my cameras (RLC-4105MP) to version 3 (3.0.0.136.20121100) and I would like to keep the versioning the same across devices.

Is version 3 of the firmware for H3MB16 NVRs' going to be released anytime soon, just so I know whether to hold my breath or not?

Thanks.

It would be nice if a Reolink member of staff posted here giving a list of wireless mice that are known to work with their devices. Better still, modify their onboard drivers to accept all mice drivers and keyboard drivers too; it makes it so hard to type long passwords in whenever you need to make changes to the system.

I thought I explained my theory, but obviously I wasn't clear enough.

Male USB Type-A connectors must come in one of 4 colours; White (USB 1), Black (USB 2), Blue (USB 3) or Red (USB 3.1). Any other colour means that it is a proprietary (I misspelled in previous post) piece of equipment which does not necessarily stick to or follow typical USB guidelines, rather like Dell who use a Yellow USB connector on a fair number of their own manufactured devices.

My Unifying receiver is an orange colour which suggested to me it was proprietary and did not necessarily adhere to USB standards, hence the reason it doesn't work on the NVR as it requires a specific driver.

I was trying to see if those that DID work were one of the standard colours and those that DIDN'T were of a non-standard, proprietary colour but @reolink's response put pay to that theory.

OK. So there's goes my theory. Both those colours are conventional USB colours but mine is orange, which is propitiatory.

My brand new M185 does not work, even though that particular model does not have the unifying logo on the dongle.

What colour is the INSIDE of the nano receiver; black, white, blue or some other colour? I'm testing a theory but until I have peoples results, I can't say whether my theory is correct or not.

Just out of curiosity, of those using the Unifying receiver, what colour is the INSIDE of the connector: white, black, blue or some other colour?

Adelphia UK wrote:

One of my Logitech mice, the one that uses the Logitech Unifying receiver does NOT work. However, my Logitech which DOESN'T use the Unifying receiver DOES work

So now I'm curious if it is the other paired devices causing this on the unifying receiver. What if you un-paired everything else on the unifying receiver, would it then work. (I don't have one to try this.)

I only have 1 device on my Logitech Unifying receiver and that's a mouse which does NOT work on my Reolink NVR (RLN8-410).

I'm glad my injection (even some 2 years or so after the original post) has helped you out. All we need to do now is compile a list of which ones are verified to work and specify if it's front, back or either USB port.

@Cynthia. Is this something you could manage by putting a pinned topic on the main page if we give you the information?

You can actually search for motion events on individual cameras using the NVR monitor – but it's pretty tedious. You can also search for events by connecting to the NVR using your computer and browser. I haven't really done any of that nor have I experimented much with motion sensitivity and masking settings in an attempt to make motion events more definitive. But it is something I will be investigating.

Yes, I know you can do this but the playback is ONLY what is recorded on the NVR. There is no way of getting access to the SD card once connected to an NVR (Reolink's anyway) as the IP address is not internally accessible.