strange that the reolink desktop app (was 8.3.1) was showing "you already have the actual version installed" when pressing button to check for update and 8.5.1 is already available...

hello, would like to ask to improve the feature of "movement detection" (push) by enabling possibility for us user increasing configuration settings more individually as the Push feature is sending way too many notifications when e.g. only the sun comes up and steady moves... (is already set to level "1") by e.g. using "detect motion movement X times within Y seconds before sending the push notification" Seconded.
Today, after years of the origin requests in 2017 the feature is not that useable; i turned it off now.
Camera which observeres the house cannot be changed more in position finally - wanted to recognize primariliy my pet in front of 3 doors in a limited area defined in front of the door... THX

hello, was shocked as i read the date of the topic/posts here - even 5 y ago it seems NOT MUCH has changed even there were pretty good improvements explained which did not cost any 1000$ to implement and support us user as the CURRENT motion detection is not useable for me - even set to a level of "1" i receive on every sunshine movement push-notifications which are annoying me that hard that i disabled the feature finally (wanted to recognize my pet in front of 3 doors)... camera place and doors in the house cannot be changed finally. Reolink pls can you provide a improvement / solution. thx

strange that the reolink desktop app (was 8.3.1) was showing "you already have the actual version installed" when pressing button to check for update and 8.5.1 is already available...

hello cynthia - no i dont mean 4 cams on 1 display - i mean e.8. 8 cams on 2 undpendent displays: check below pls: ( i already aligne with Arielle )

i´m not talking on NVRs
I´m talking about PC/MAc client software.
i run 2 monitors on my PC Windows
i have 9 cams installed on my NVR which i can access/view on my PC/mobile... clear
But:
Yes, i can choose 9 cams being displayed on one monitor, i can select 1 cam full-screen, whatever.

I want to have the functionality to use BOTH of my monitors same time;
means i want to view e.g. 4 cams on monitor 1 and the other 5 cams on monitor 2
then the 9 gets bigger than viewing 9 cams on only 1 monitor
I dont want to leave one monitor empty because reolink doesnt support split/Screen mode like this: https://www.steinberg.net/forums/download/file.php?id=9026

i hope now its clear what i mean kR Tom

Hello, for development:
it is very uncomfortable to enter the password / login into NVR already when only want to zoom in.
For accessing controls / Settings its clear to have PW secured - but not for the zooming only.

Ok plks close this - i found the setting disable PW in NVR... sorry

i´m sorry for the misleading descriptions: i meant that multiple monitors / displays have to be supported to enlarge cam´s screens. (on PC/Mac Software´s)

Hello:
for development: it should be supported to run 2 or 3 screen simultaneously when having more than e.g. 4 cams installed.
it would be better to watch each 4 cams on 2 screens rather then 8 cams on one screen and leave a second screen empty.
this would be also an advantage to reolink image / competitors...

is there any POE system (NVR) in porttfolio available like 4K RLK16-800B8 or RLK8-800B6 or else being possible to attach additionally WLAN cameras to ? if, which and which camera(s) would be supported? and how many? e.g. on 16: 8 POE and 8WLAN? thanks!