I have 2 RLC-834A cameras but don’t work with Alexa live view. Is there a list of cameras that for sure work with Alexa live view?

My RLN8-410 NVR died after 3 years ( support ticket 112-5824601-2591439)

Is there a way to remote login into the desktop software and see the cameras on my Lan?

Mike

*Update* This did work Thank You, step 5 I had to manually type but other then that it worked like a charm.

Thanks Again!

I checked this problem with our R&D people. May I know if you connect the RLC-423 to channel 1 on the NVR? If you are, it is normal that the camera on channel 1 is added to the Blue Iris. If you also want to add other cameras to Blue Iris, you should modify the video path according to the channel. For example, if you want to add the camera in channel 2 to Blue Iris, you should change the path as /h264Preview_02_main in step 5. Please check the sample graph in the attachment.

Thanks Carl, Ill try that out tonight.

@Crimpon it was port 8000

Yes, if you connect the camera to the NVR, you will not be able to access it separately. If you want to access it separately, you need to connect it to the router and let the router assign the IP for it. And then you can refer to How to Add Reolink Cameras to Blue Iris to add the camera to Blue Iris.

currently I have my PTZ camera connected to my reolink NVR and when I scan Network cameras on Blue Iris I can set up and view my RLC-423 camera. I added a screenshot to show Blue Iris and Reolink app showing the same camera at the same time.

https://drive.google.com/file/d/1WvqXKbxkn0ZHaeLnnn1NoxR5COzkOZG6/view?usp=sharing

Thank You, I'll buy a few more.

(other people reading, you will need a separate poe hub)

My RLC-423 is POE only it doesn't have wifi capabilities. It's wired directly to NVR.

I currently have RLN8-410 with 7 RLC-410 and one RLC-423. My RLC-423 can be seen on my LAN with the same IP address as my NVR but just different port. How can I update my other cameras to be seen on my lan so I can connect them to Blue Iris too.


(blue Iris is quicker to connect on my phone then the app)

Be nice to know if this is true or not.

I replied back, please respond back.
firmware.png