Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Topics created by user_639868941582417_639868941582417

relation Privacy Mask and Detection Zone

I had detection zones set up on my RNL36, but was not aware of, and had therefor no Privacy Mask zones set on the RCL-823 (8mp). I do now, and these show up on my tv when I change input to the RNL hdmi out. The issue is I had many false alarms (alarm output of the RNL36 activated) but no recording,
Learn More

Discussion About Products | | user_639868941582417_639868941582417

0

1
recorder experience with removed cooling fans

Re: RLN36 Fan Noise I'm now running my RNL36 for more than a year without the fans. They were removed on day 3. It runs 24/7. It is set to record on alarm only and fitted with an SSD. I placed some 20mm high wood under it to increase the passive airflow area, and placed a 20x20x20mm aluminium U sect
Learn More

Discussion About Products | | user_639868941582417_639868941582417

0

2
RNL36 & 823A alarm logic

I have a RNL36 and and a 823A. I use the RNL alarm output,. I see two or three variations in functionality (latest firmware installed) and do not understand what is happening. Is there a certain sequence in the firmware that causes this? To me it looks like the 823 sends an alarm, and it decides to
Learn More

Discussion About Products | | user_639868941582417_639868941582417

0

1
Software logic error in RLN36 alarm out?

Not sure how it works, but my 823A detects something, and the RLN36 alarm out I've connected to a light via a wireless Thrust switch is activated immediately. The light goes on, the camera's white LED's (at night) do not go on, and it does not start recording. It looks to me the alarm is activated
Learn More

Discussion About Products | | user_639868941582417_639868941582417

0

1
Camera not showing up on NVR list in client

Camera (823A) and NVR (RNL36) connected to Router. Both show up as connected in client. Camera simply named Channnel01. The camera works in Client and provides llve view in all 3 quality settings. But I can not get it to load on the NVR. Channel01 states connection failed. Before it worked with the
Learn More

Reolink Client & APP | | user_639868941582417_639868941582417

0

2
rln36 alarm but no video

I have the RLN36 with a RCL823A. Now playing with the alarm outputs to switch on lights thu wireless Thrust switches. That seems to work fine. However I notice I get short alarms, alarm out is activated, light goes on for up to 10-12 seconds, but no video recording. Also LED spot lights on the 823 a
Learn More

Discussion About Products | | user_639868941582417_639868941582417

0

2

Topics created by user_639868941582417_639868941582417

relation Privacy Mask and Detection Zone

recorder experience with removed cooling fans

RNL36 & 823A alarm logic

Software logic error in RLN36 alarm out?

Camera not showing up on NVR list in client

rln36 alarm but no video