1. Home
  2. Discussion About Products


  • I know, even other Reolink cameras don't have APIs yet. But they have ONVIF, which is still some kind of 3rd party integration capability. I think Argus really need some APIs so that it can be used along with other products. Other than designing integration with specific products like SmartThings, I
    | Guest
    0
    5


  • Does anyone have the lens thread information for the RLC-410? I'd like to have a wider field of view (FOV), and am considering swapping the lens. From video teardowns of other brands, M12x0.5 may be the thread. TIA.
    | carbonita_23339214035
    0
    1


  • The paper template for mounting is not correct. If you place the template on a surface with the printed side facing you and mark the 4 mounting holes AND mark the hole for the wire, the hole for the wire will NOT align with the actual wire on the camera. Also, the diameter of the outer most printe
    | Tom Scheifler_59775922064
    0
    4


  • Hi all, There must be someone who has tried to install a 5TB or larger HDD inside the reolink NVR's (8 to 16 channel). I know officially they only support 3x 4TB drives but before I go out and buy a 8TB single disk I'd like to know this answer. Reolink - its been a almost a year since someone els
    | Guest
    0
    3


  • Hello, I have a question regarding how devices are grouped under devices. Specifically if you have your cameras added to your NVR, but the cameras are plugged into a POE switch instead of the NVR. They each show up as a Device rather than cameras under or grouped together under a device. Is there
    | Guest
    0
    1


  • Hi all, Looking for some ideas here. I like the look of the Reolink hardware and the quality looks pretty good. Unfortunately I need a bit more flexibility in the setup. I require a snapshot and live stream from each camera. I use them for HomeKit and domoticz integration. Also use the CGI URL’s
    | Guest
    0
    1


  • Problem: I get no alert notifications on my iPhone when I am not at home (neither push nor e-mail). When I am home and connected with my wifi, I get the push notification and also an e-mail when motion is detected. I setup my Argus, the camera is in wifi, connection to internet is working and the P
    | Guest
    0
    1


  • ICYMI New version of the PC client 7.2.2.18 dated 15mar2018 is available from the download site. For those with multiple cams, you may want to record your UIDs for entry into the new software (no import capability). Release notes from the download manifest below. Release note.txt 1.Supports Reolin
    | carbonita_23339214035
    0
    2


  • You know how if you go outside at night and look at your cameras you can see the IR lights glow red? Or if you take a picture of the camera with your phone you can see the lights? I have 4 RLC-410's 1 RLC-423 and a C2.... At night/in the dark all the lights are on and red on all of the cameras excep
    | fandcsable_49509744983
    0
    3


  • Hi there, I search a reolink for a small pub. I want to record every person how comes through the door. (And i have only Linux on my computer, but an android smartphone) I am not sure if i need a security system (RLK4-210WB2 ?) or if a single Camera is enough. I want to store the videos for 24h. S
    | Guest
    0
    6


  • I have a guest user setup, and that user only gets the ability to remote view cameras. Everything else is disabled, yet the guest has the ability to change the date, the NVR name, and change the password. I'd like to be able to use this, but as a guest, I dont think they should be able to do these
    | Guest
    0
    3


  • I have a RLC-411WS camera, outdoors with wifi. It worked for a little while (although my SecuritySpy software generated tons of errors from it every day - the connection wasn't solid, even though my wifi is strong where it is), but all of a sudden, the live view web client is showing a blank screen,
    | michael.levin_65261799246
    0
    2


  • After Update the Firmware i have no Stream. Kann i downgrade the Firmware. I can not find older Firmware?
    | Soerenober_65246624580
    0
    2


  • Is there any way to obtain a recent (but previous) firmware version? When I upgraded to the most recent version (2017-08-30) for RLC-410 I started having an issue that is like a very fast reboot - no configuration changes will register, the live view goes blank, and then it reappears and for a brief
    | Guest
    0
    4


  • Hi there, new RCL-422 owner here. I need to embed the live feed into a web page. All LAN based, so no port forwarding needed. Using a simple iFrame - I can see the Reolink page but it includes all the Reolink elements (buttons, logos, etc) as well as the live feed. Is there any way to just get t
    | Guest
    0
    3


  • Hello, Had system for about 2 weeks. During replay, I'll capture pictures or clips. Bottom right hand corner of Reolink Client pop up windows says saves are successful. When I go to ‘Capture’ and ‘Download’ folders on my C/ drive folders are empty... where do saves go? Are they masked (hidden). I'v
    | dtike_61587317663
    0
    1


  • Hi, I have a NVR 16 CH with different cameras. I has been trying to update the last firmware and the NVR is not reading the USB. I downloaded the firmware from the Reolink website and I has been following each steps to upload the firmware, downloaded the Zip file, decompressed to a folder and nothin
    | famcubanito1_65019977411
    0
    2


  • I've a camera behind a windows glass. The outside is lighted well, at night I get nothing because the led lights of the camera are mirrored because of the glass. How do I turn the leds off short of breaking them off or removing them. :)
    | rodney_61291462382
    0
    7


  • Greetings, I have outgrown my 4 Dahua 2mp camera NVR-based 5yo home system from nelly's security. Looking for something better, but more importantly, a system I can manage in a Mac environment. First basic question. If I have 6 reolink cameras, 4mp and 5mp's, all cat6 POE connected, do I have to
    | Guest
    0
    6


  • I have tried to follow the Reolink tips: https://reolink.com/faq/add-reolink-cameras-to-blue-iris/ But on my version of the Windows Client V7.2.2.12 there is NO display of the H.264 profile to even set! I've tried going on with the instructions and it doesn't work. Anyone been able to do this suc
    | Jeff_49412922664
    0
    1

Welcome Back!

Hi there! Join the Commnunity to get all the latest news, tips and more!

Join Now