Disable / Enable all Sirens with a single button

[robert leyzerovich_519547077562499]

As the title says, we need an option to enable or disable all sirens of the cameras at once with a single button.

I have a schedule time for my siren but I have family that come during the siren window and it is a pain to disable every single one at a time then re-enable everything again once they are inside.


would be nice without opening the app for iPhone to long press the Reolink app and enable or disable sirens.

[joseph_1979]

@robert-leyzerovich_519547077562499 Good point. They can add it under the scene mode as they did for push notification, recording, etc. Another option would be Geofencing but this is still being evaluated by Reolink.

[Kristof]

@robert-leyzerovich_519547077562499 Isn't this mostly already included in scene mode? At least there you have the possibility to disable all sirens at once. It also barely takes longer to enter the app and scene mode than to long press the app icon etc.

[robert leyzerovich_519547077562499]

@kristof
doesn't stop the sirens from going off.

[joseph_1979]

@joseph-chircop_497308027822318 Disabling siren only is not available in scene mode. You have to disable recording which is not what is required.

[Kristof]

@joseph-chircop_497308027822318 Well whats the little Siren Symbol then? The third one in scene mode?
First is Push, second Record, third siren, 4th email?
https://support.reolink.com/hc/en-us/articles/360026049414-How-to-Set-the-Scene-Mode-for-Your-Cameras

Just curious without having checked by myself, because intuitively it means for me disable/enable siren...

[joseph_1979]

@kristof uh...they always use different words. Audio..they should write Siren. Thanks for your correction. I never opted to switch off siren through the scene mode. Apologise. I will inform support.

[user_813266447470777_813266447470777]

@joseph_1979

Wrong. 
If you have an NVR and cameras connected to it, then that symbol enables and disables the BUZZER of the NVR.
It is completely not useful and misleading.

[joseph_1979]

@user_813266447470777_813266447470777 The context was on scene mode and no nvr was involved.

[user_813266447470777_813266447470777]

@joseph_1979

Even worst.
Different behaviors for same products.
Very misleading for users and bad in terms of usability.

Basically if you use cameras, with microSD, then they are detected as single devices, and that icon on scenes mod works on their sound system ( siren )

But if you use a Reolink kit with an NVR and several cameras connected, that icon of the scene refers to the sound system of the NVR ( the buzzer )

This needs to be fixed, really, please.