RLN8-410 fail to backup certain time period GMT 00:00 - 01:00

[user_620020921540663_620020921540663]

Been working a problem for almost 2 weeks with Reolink support and I'm curious if anyone else has seen this issue. If I try to do a backup between 19:00 - 20:00 CST (00:00 GMT - 01:00 GMT) the backups will fail. But if I begin the backup at 18:59 CST it will backup fine. All video playback is fine, it's just backup that fails. Backup on console to USB in the 19:00 - 20:00 time period crashes the NVR and reboots while on the Windows client it just comes back with Fail. This seems like a firmware issue related to DST possibly but I've not found any other posts about this issue. I have a RLN8-410, hardware No. N3MB01 and firmware v3.0.0.200_22081500

[joseph_1979]

@user_620020921540663_620020921540663 And if you set the start time to 19:01 will it fail?

[user_620020921540663_620020921540663]

@joseph-chircop_497308027822318

Yes, if the start time is after 19:00 it will fail if the end time is before 20:00. But if I set start time to 18:59 to 20:00 then it creates the backups.

[user_620020921540663_620020921540663]

I appreciate your inquiries and any insight you could shed on this issue but I wasn't really looking for diagnosis since I have a case I've been working with support. I was really looking to see if I'm an isolated instance or if others have the same problem. Anyway I just went through trying another backup and here are the results.

Backup
  Start -    End
19:00:06 - 19:59:41 backup fails
19:00:06 - 19:59:45 backup fails
19:00:06 - 19:59:48 backup fails
19:00:06 - 19:59:50 Backup video from 19:59:49 - 20:00:02
19:00:06 - 20:04:03 Backup video from 19:59:49 - 20:04:20

18:59:52 - 19:59:45 Backup video from 18:59:34 - 19:59:44
18:59:52 - 19:59:50 Backup video from 18:59:34 - 19:59:52
18:59:52 - 20:04:03 Backup video from 18:59:34 - 20:04:20

[joseph_1979]

@user_620020921540663_620020921540663 Thanks a lot for your patience. The last two of the first batch were executed because it exceeded 01:00. So the issue is when the hour remains zero between the start and end and there is no video which ended after the hour. This is a simple software bug which Reolink can resolve. I guess they will provide you with a beta firmware to check it out.